The data manual for DP83867IR/CR, SNLS484E[1], revised march 2017, advises that strapping RX_DV/RX_CTRL pin in mode 1 and 2 is not supported (see note below Table 5 (4-Level Strap Pins)).
There are some boards which have the pin strapped this way and need software workaround suggested by the data manual. Bit[7] of Configuration Register 4 (address 0x0031) must be cleared to 0. This ensures proper operation of the PHY. Implement driver support for device-tree property meant to advertise the wrong strapping. [1] http://www.ti.com/lit/ds/snls484e/snls484e.pdf Based on commit 371444764b98 ("net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap") of mainline linux kernel. Signed-off-by: Janine Hagemann <j.hagem...@phytec.de> --- v2: Change commit reference format --- drivers/net/phy/ti.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/net/phy/ti.c b/drivers/net/phy/ti.c index ea1ee24..f0ca8f2 100644 --- a/drivers/net/phy/ti.c +++ b/drivers/net/phy/ti.c @@ -111,6 +111,7 @@ struct dp83867_private { int fifo_depth; int io_impedance; int port_mirroring; + bool rxctrl_strap_quirk; }; /** @@ -219,6 +220,9 @@ static int dp83867_of_init(struct phy_device *phydev) else dp83867->io_impedance = -EINVAL; + dp83867->rxctrl_strap_quirk = fdtdec_get_bool(fdt, node, + "ti,dp83867-rxctrl-strap-quirk"); + dp83867->rx_id_delay = fdtdec_get_uint(gd->fdt_blob, dev_of_offset(dev), "ti,rx-internal-delay", -1); @@ -274,6 +278,15 @@ static int dp83867_config(struct phy_device *phydev) phy_write(phydev, MDIO_DEVAD_NONE, DP83867_CTRL, val | DP83867_SW_RESTART); + /* RX_DV/RX_CTRL strapped in mode 1 or mode 2 workaround */ + if (dp83867->rxctrl_strap_quirk) { + val = phy_read_mmd_indirect(phydev, DP83867_CFG4, + DP83867_DEVADDR, phydev->addr); + val &= ~BIT(7); + phy_write_mmd_indirect(phydev, DP83867_CFG4, DP83867_DEVADDR, + phydev->addr, val); + } + if (phy_interface_is_rgmii(phydev)) { ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_DP83867_PHYCTRL, (DP83867_MDI_CROSSOVER_AUTO << DP83867_MDI_CROSSOVER) | -- 2.7.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
