HI all, I am working on OMAP3 based SoC. I am trying to send uImage over serial port using kermit. I have followed folowing:
1. issued a loadb command on u-boot prompt. 2. On c-termit> send /bin uImage Every time after this transfer get started but then aborted automatically with following error message: ************************* SEND-class command failed. Packets sent: 193 Retransmissions: 135 Timeouts: 10 Damaged packets: 0 Fatal Kermit Protocol Error: Too many retries HINTS... If the preceding error message does not explain the failure: . Try changing the remote Kermit's FLOW-CONTROL setting. . Increase the retry limit (see HELP SET RETRY). . Try it again with SET STREAMING OFF. . Try it again with SET PARITY SPACE. . As a last resort, give a ROBUST command and try again. Also: . Be sure the source file has read permission. . Be sure the target directory has write permission. (Use SET HINTS OFF to suppress hints.) ************************* But if I try to send a small file then it get transfered successfully. What could be the cause of this issue. ~cnanda
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
