Dear Stefano Babic, In message <4b540ab9.5080...@denx.de> you wrote: > > > What happens if - for example - CONFIG_SYS_MX51_UART1 _and_ > > CONFIG_SYS_MX51_UART2 are defiend? How is CONFIG_SERIAL_MULTI going to > > be supported? > > The patch adds only support for the i.MX51 and does
Something missing here ??? > I understand what you mean. However, the driver at moment has the same > problem with other processors (MX27, MX31). Should be not better to fix > this issue with another patch that has nothing to do with i.MX51 ? That's OK with me. But then, this shouldbe documented so nobody tries to enable more than one serial port. > There is already a patch by John Rigby to drop them and using a general > function for all of them. However, you are reviewing my first patchset. Sorry, I only noticed this later :-( > In V2 I have already removed the special implementation for MX51 and I > have added the general function imx_get_uartclk(), as John implemented > for the other MX processors. Thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de "There are three principal ways to lose money: wine, women, and en- gineers. While the first two are more pleasant, the third is by far the more certain." -- Baron Rothschild, ca. 1800 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
