Hi Stefano,
> The patch add header files to support the Freescale i.MX51
> processor, setting definitions for internal registers.
>
> Signed-off-by: Stefano Babic <sba...@denx.de>
> Signed-off-by: Fred Fan fanyef...@gmail.com
> ---
> include/asm-arm/arch-mx51/crm_regs.h | 182 +++++++++++++++++++++
> include/asm-arm/arch-mx51/imx-regs.h | 298
> ++++++++++++++++++++++++++++++++++
> 2 files changed, 480 insertions(+), 0 deletions(-)
> create mode 100644 include/asm-arm/arch-mx51/crm_regs.h
> create mode 100644 include/asm-arm/arch-mx51/imx-regs.h
>
> diff --git a/include/asm-arm/arch-mx51/crm_regs.h
> b/include/asm-arm/arch-mx51/crm_regs.h
> new file mode 100644
> index 0000000..92da560
> --- /dev/null
> +++ b/include/asm-arm/arch-mx51/crm_regs.h
> @@ -0,0 +1,182 @@
> +/*
> + * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
> + */
> +
> +/*
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
Again we need to state explicitely the version of the GPL.
> +#ifndef __ARCH_ARM_MACH_MX51_CRM_REGS_H__
> +#define __ARCH_ARM_MACH_MX51_CRM_REGS_H__
> +
> +#define MXC_CCM_BASE CCM_BASE_ADDR
> +
> +/* DPLL register mapping structure */
> +struct mxc_pll_reg {
> + unsigned int ctrl;
> + unsigned int config;
> + unsigned int op;
> + unsigned int mfd;
> + unsigned int mfn;
> + unsigned int mfn_minus;
> + unsigned int mfn_plus;
> + unsigned int hfs_op;
> + unsigned int hfs_mfd;
> + unsigned int hfs_mfn;
> + unsigned int mfn_togc;
> + unsigned int destat;
Why not use u32 to explicitely state the width? Same goes for the rest
of the file.
Cheers
Detlev
--
Zivilisation ist der Zaubertrick, der uns unsere wahre Natur verbirgt.
-- Salman Rushdie
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: d...@denx.de
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
