On Wed, Jan 24, 2018 at 10:26 AM, Mehmet Ali İPİN <mehmet.i...@pavotek.com.tr> wrote: > Dear Estevam, > > I am (in fact hardware engineer developed the PCB) not an experienced > u-boot/linux developer, therefore sorry for my complex questions. > I will check the forum, and google for this message, but you may help me to > start the right path. > > May be, according to your experience you can advise me to check some > (phy/mac) register, pin status, clock values, > Or give the name of threads in u-boot or nxp imx6 forum which is about > similar dhcp events, if you remember. > > Since its a new PCB board, so we did not load/run the linux yet.
Try looking at existing supported boards that use KSZ9021, such as board/boundary/nitrogen6x/nitrogen6x.c for example. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
