On Wed, Jan 24, 2018 at 9:57 AM, Mehmet Ali İPİN <mehmet.i...@pavotek.com.tr> wrote: > Dear Estevam, > > Thank you very much; With your helps managed to use u-boot 2018, gcc 7.2 and > SPL, generated > u-boot.img image and downloaded into board. > > SD card and e-MMC working well. Ethernet Phy is also answering mii info as > shown below: > > => mii info > PHY 0x05: OUI = 0x0885, Model = 0x21, Rev = 0x01, 10baseT, HDX > => setenv ipadr 10.0.0.10 > => dhcp > FEC Waiting for PHY auto negotiation to complete......... TIMEOUT ! > Could not initialize PHY FEC > BOOTP broadcast 1 > BOOTP broadcast 2 > . > . > . > BOOTP broadcast 17 > > Retry time exceeded; starting again. > > I would be grateful, if you Have any idea how can I test and solve the dhcp > command?
It's hard to understand what could be wrong without seeing your code nor schematics. Are you able to get Ethernet working in Linux? _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
