From: Stephen Warren <swar...@nvidia.com>
U-Boot typically uses a hard-coded value for the stack pointer before
relocation. Implement option SYS_INIT_SP_BSS_OFFSET to instead calculate
the initial SP at run-time. This is useful to avoid hard-coding addresses
into U-Boot, so that can be loaded and executed at arbitrary addresses and
thus avoid using arbitrary addresses at runtime. This option's value is
the offset added to &_bss_start in order to calculate the stack pointer.
This offset should be large enough so that the early malloc region, global
data (gd), and early stack usage do not overlap any appended DTB.
Signed-off-by: Stephen Warren <swar...@nvidia.com>
---
arch/arm/Kconfig | 13 +++++++++++++
arch/arm/lib/crt0_64.S | 3 +++
2 files changed, 16 insertions(+)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f2c35e32c649..93b93c142929 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -19,6 +19,19 @@ config POSITION_INDEPENDENT
from almost any address. This logic relies on the relocation
information that is embedded into the binary to support U-Boot
relocating itself to the top-of-RAM later during execution.
+
+config SYS_INIT_SP_BSS_OFFSET
+ int
+ help
+ U-Boot typically uses a hard-coded value for the stack pointer
+ before relocation. Define this option to instead calculate the
+ initial SP at run-time. This is useful to avoid hard-coding addresses
+ into U-Boot, so that can be loaded and executed at arbitrary
+ addresses and thus avoid using arbitrary addresses at runtime. This
+ option's value is the offset added to &_bss_start in order to
+ calculate the stack pointer. This offset should be large enough so
+ that the early malloc region, global data (gd), and early stack usage
+ do not overlap any appended DTB.
endif
config STATIC_RELA
diff --git a/arch/arm/lib/crt0_64.S b/arch/arm/lib/crt0_64.S
index 9cb70552feda..a181283e0fa9 100644
--- a/arch/arm/lib/crt0_64.S
+++ b/arch/arm/lib/crt0_64.S
@@ -73,6 +73,9 @@ ENTRY(_main)
ldr x0, =(CONFIG_TPL_STACK)
#elif defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK)
ldr x0, =(CONFIG_SPL_STACK)
+#elif defined(CONFIG_SYS_INIT_SP_BSS_OFFSET)
+ adr x0, __bss_start
+ add x0, x0, #CONFIG_SYS_INIT_SP_BSS_OFFSET
#else
ldr x0, =(CONFIG_SYS_INIT_SP_ADDR)
#endif
--
2.15.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
