Hi, On Sat, Nov 25, 2017 at 1:08 PM, Chen-Yu Tsai <w...@csie.org> wrote: > Hi, > > This series enables the EMAC for some A83T and A64 boards. > > Changes since v1: > > - Added "bitfield: Include linux/bitops.h for ffs()" to fix build > errors > - Use bitfield_replace_by_mask() instead of open coding bitfield ops > - Trimmed used pins in the device tree to only those actually needed > - Enabled Realtek PHY driver > - Added "sunxi: Enable EMAC on the Bananapi M64" > > ChenYu > > > Chen-Yu Tsai (5): > bitfield: Include linux/bitops.h for ffs() > net: sun8i_emac: Support RX/TX delay chains > sunxi: Enable EMAC on the Cubietruck Plus > sunxi: Enable EMAC on the Bananapi M3 > sunxi: Enable EMAC on the Bananapi M64
Any comments (particularly two the first two patches) on this series? Joe? ChenYu > > arch/arm/dts/sun50i-a64-bananapi-m64-u-boot.dtsi | 39 +++++++++++++++++++++ > arch/arm/dts/sun8i-a83t-bananapi-m3-u-boot.dtsi | 40 > ++++++++++++++++++++++ > .../arm/dts/sun8i-a83t-cubietruck-plus-u-boot.dtsi | 38 ++++++++++++++++++++ > configs/Cubietruck_plus_defconfig | 2 ++ > configs/Sinovoip_BPI_M3_defconfig | 2 ++ > drivers/net/sun8i_emac.c | 22 ++++++++++++ > include/bitfield.h | 1 + > 7 files changed, 144 insertions(+) > create mode 100644 arch/arm/dts/sun50i-a64-bananapi-m64-u-boot.dtsi > create mode 100644 arch/arm/dts/sun8i-a83t-bananapi-m3-u-boot.dtsi > create mode 100644 arch/arm/dts/sun8i-a83t-cubietruck-plus-u-boot.dtsi > > -- > 2.15.0 > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
