On Mon, Nov 27, 2017 at 04:19:31PM +0800, Chen-Yu Tsai wrote:
> On Mon, Nov 27, 2017 at 4:09 PM, Maxime Ripard
> <maxime.rip...@free-electrons.com> wrote:
> > Hi,
> >
> > On Sat, Nov 25, 2017 at 01:08:30PM +0800, Chen-Yu Tsai wrote:
> >> The Cubietruck Plus has an RTL8211E PHY connected to the EMAC using
> >> RGMII. The PHY is powered by DLDO4 @ 3.3V, while the I/O pins are
> >> powered by DLDO3 @ 2.5V.
> >>
> >> This patch adds a U-boot specific dtsi file for the board adding
> >> an enabled EMAC node, and enables the EMAC driver in the defconfig.
> >> The binding used here is the old revision currently supported in
> >> U-boot. The U-boot driver has not been updated to support the new
> >> binding.
> >>
> >> Signed-off-by: Chen-Yu Tsai <w...@csie.org>
> >> ---
> >> .../arm/dts/sun8i-a83t-cubietruck-plus-u-boot.dtsi | 38
> >> ++++++++++++++++++++++
> >> configs/Cubietruck_plus_defconfig | 2 ++
> >> 2 files changed, 40 insertions(+)
> >> create mode 100644 arch/arm/dts/sun8i-a83t-cubietruck-plus-u-boot.dtsi
> >>
> >> diff --git a/arch/arm/dts/sun8i-a83t-cubietruck-plus-u-boot.dtsi
> >> b/arch/arm/dts/sun8i-a83t-cubietruck-plus-u-boot.dtsi
> >> new file mode 100644
> >> index 000000000000..4637e128f76e
> >> --- /dev/null
> >> +++ b/arch/arm/dts/sun8i-a83t-cubietruck-plus-u-boot.dtsi
> >> @@ -0,0 +1,38 @@
> >> +#include "sunxi-u-boot.dtsi"
> >> +
> >> +/ {
> >> + aliases {
> >> + ethernet0 = &emac;
> >> + };
> >> +
> >> + soc {
> >> + emac: ethernet@01c30000 {
> >> + compatible = "allwinner,sun8i-a83t-emac";
> >> + reg = <0x01c30000 0x2000>, <0x01c00030 0x4>;
> >> + reg-names = "emac", "syscon";
> >> + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
> >> + #address-cells = <1>;
> >> + #size-cells = <0>;
> >> + pinctrl-names = "default";
> >> + pinctrl-0 = <&rgmii_pins>;
> >> + phy-mode = "rgmii";
> >> + phy = <&phy1>;
> >> + status = "okay";
> >> +
> >> + phy1: ethernet-phy@1 {
> >> + reg = <1>;
> >> + };
> >> + };
> >> + };
> >> +};
> >
> > Now that we have a binding merged, can't we use that instead?
>
> That is the next step. It's also why I have these in a U-boot
> specific dtsi file. The driver is upgraded to support the now
> official bindings, then we sync up the dts files and rip out
> the u-boot stuff.
>
> However I'm not sure when I'll get to that, and I'd like this
> feature to be available for people that need might it, such as
> the kernelci.org board farms.Ok, that works for me. On the DT part, Acked-by: Maxime Ripard <maxime.rip...@free-electrons.com> Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com
signature.asc
Description: PGP signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
