Hi,
This series enables the EMAC for some A83T and A64 boards.
Changes since v1:
- Added "bitfield: Include linux/bitops.h for ffs()" to fix build
errors
- Use bitfield_replace_by_mask() instead of open coding bitfield ops
- Trimmed used pins in the device tree to only those actually needed
- Enabled Realtek PHY driver
- Added "sunxi: Enable EMAC on the Bananapi M64"
ChenYu
Chen-Yu Tsai (5):
bitfield: Include linux/bitops.h for ffs()
net: sun8i_emac: Support RX/TX delay chains
sunxi: Enable EMAC on the Cubietruck Plus
sunxi: Enable EMAC on the Bananapi M3
sunxi: Enable EMAC on the Bananapi M64
arch/arm/dts/sun50i-a64-bananapi-m64-u-boot.dtsi | 39 +++++++++++++++++++++
arch/arm/dts/sun8i-a83t-bananapi-m3-u-boot.dtsi | 40 ++++++++++++++++++++++
.../arm/dts/sun8i-a83t-cubietruck-plus-u-boot.dtsi | 38 ++++++++++++++++++++
configs/Cubietruck_plus_defconfig | 2 ++
configs/Sinovoip_BPI_M3_defconfig | 2 ++
drivers/net/sun8i_emac.c | 22 ++++++++++++
include/bitfield.h | 1 +
7 files changed, 144 insertions(+)
create mode 100644 arch/arm/dts/sun50i-a64-bananapi-m64-u-boot.dtsi
create mode 100644 arch/arm/dts/sun8i-a83t-bananapi-m3-u-boot.dtsi
create mode 100644 arch/arm/dts/sun8i-a83t-cubietruck-plus-u-boot.dtsi
--
2.15.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
