On 10/05/2017 08:07 AM, chin.liang....@intel.com wrote:
> From: Chin Liang See <chin.liang....@intel.com>
>
> Add mailbox support for Stratix SoC
>
> Signed-off-by: Ley Foon Tan <ley.foon....@intel.com>
> Signed-off-by: Chin Liang See <chin.liang....@intel.com>
> ---
> arch/arm/mach-socfpga/Makefile | 1 +
> arch/arm/mach-socfpga/include/mach/mailbox_s10.h | 108 ++++++++++
> arch/arm/mach-socfpga/mailbox_s10.c | 238
> +++++++++++++++++++++++
> 3 files changed, 347 insertions(+)
> create mode 100644 arch/arm/mach-socfpga/include/mach/mailbox_s10.h
> create mode 100644 arch/arm/mach-socfpga/mailbox_s10.c
>
> diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile
> index b253914..43e18d2 100644
> --- a/arch/arm/mach-socfpga/Makefile
> +++ b/arch/arm/mach-socfpga/Makefile
> @@ -32,6 +32,7 @@ endif
>
> ifdef CONFIG_TARGET_SOCFPGA_STRATIX10
> obj-y += clock_manager_s10.o
> +obj-y += mailbox_s10.o
> obj-y += misc_s10.o
> obj-y += reset_manager_s10.o
> obj-y += system_manager_s10.o
> diff --git a/arch/arm/mach-socfpga/include/mach/mailbox_s10.h
> b/arch/arm/mach-socfpga/include/mach/mailbox_s10.h
> new file mode 100644
> index 0000000..b9bddf6
> --- /dev/null
> +++ b/arch/arm/mach-socfpga/include/mach/mailbox_s10.h
> @@ -0,0 +1,108 @@
> +/*
> + * Copyright (C) 2017 Intel Corporation <www.intel.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0
> + */
> +#ifndef _MAILBOX_S10_H_
> +#define _MAILBOX_S10_H_
> +
> +/* user define Uboot ID */
> +#define MBOX_CLIENT_ID_UBOOT 0xB
> +#define MBOX_ID_UBOOT 0x1
> +
> +#define MBOX_MAX_CMD_INDEX 2047
> +#define MBOX_CMD_BUFFER_SIZE 32
> +#define MBOX_RESP_BUFFER_SIZE 16
> +
> +#define MBOX_HDR_CMD_LSB 0
> +#define MBOX_HDR_CMD_MSK (BIT(11) - 1)
> +#define MBOX_HDR_I_LSB 11
> +#define MBOX_HDR_I_MSK BIT(11)
> +#define MBOX_HDR_LEN_LSB 12
> +#define MBOX_HDR_LEN_MSK 0x007FF000
> +#define MBOX_HDR_ID_LSB 24
> +#define MBOX_HDR_ID_MSK 0x0F000000
> +#define MBOX_HDR_CLIENT_LSB 28
> +#define MBOX_HDR_CLIENT_MSK 0xF0000000
> +
> +/* Interrupt flags */
> +#define MBOX_FLAGS_INT_COE BIT(0) /* COUT update interrupt enable */
> +#define MBOX_FLAGS_INT_RIE BIT(1) /* RIN update interrupt enable */
> +#define MBOX_FLAGS_INT_UAE BIT(8) /* Urgent ACK interrupt enable */
> +#define MBOX_ALL_INTRS (MBOX_FLAGS_INT_COE | \
> + MBOX_FLAGS_INT_RIE | \
> + MBOX_FLAGS_INT_UAE)
> +
> +/* Status */
> +#define MBOX_STATUS_UA_MSK BIT(8)
> +
> +#define MBOX_CMD_HEADER(client, id, len, cmd) \
> + (((cmd) << MBOX_HDR_CMD_LSB) & MBOX_HDR_CMD_MSK) | \
> + (((len) << MBOX_HDR_LEN_LSB) & MBOX_HDR_LEN_MSK) | \
> + (((id) << MBOX_HDR_ID_LSB) & MBOX_HDR_ID_MSK) | \
> + (((client) << MBOX_HDR_CLIENT_LSB) & MBOX_HDR_CLIENT_MSK)
> +
> +#define MBOX_RESP_ERR_GET(resp) \
> + (((resp) & MBOX_HDR_CMD_MSK) >> MBOX_HDR_CMD_LSB)
> +#define MBOX_RESP_LEN_GET(resp) \
> + (((resp) & MBOX_HDR_LEN_MSK) >> MBOX_HDR_LEN_LSB)
> +#define MBOX_RESP_ID_GET(resp) \
> + (((resp) & MBOX_HDR_ID_MSK) >> MBOX_HDR_ID_LSB)
> +#define MBOX_RESP_CLIENT_GET(resp) \
> + (((resp) & MBOX_HDR_CLIENT_MSK) >> MBOX_HDR_CLIENT_LSB)
> +
> +/* Response error list */
> +typedef enum {
> + /* CMD completed succesfully, but check resp ARGS for any errors */
> + MBOX_RESP_STATOK = 0,
> + /* CMD is incorrectly formatted in some way */
> + MBOX_RESP_INVALID_COMMAND = 1,
> + /* BootROM Command code not undesrtood */
> + MBOX_RESP_UNKNOWN_BR = 2,
> + /* CMD code not recognized by firmware */
> + MBOX_RESP_UNKNOWN = 3,
> + /* Indicates that the device is not configured */
> + MBOX_RESP_NOT_CONFIGURED = 256,
> + /* Indicates that the device is busy */
> + MBOX_RESP_DEVICE_BUSY = 0x1FF,
> + /* Indicates that there is no valid response available */
> + MBOX_RESP_NO_VALID_RESP_AVAILABLE = 0x2FF,
> + /* General Error */
> + MBOX_RESP_ERROR = 0x3FF,
> +} ALT_SDM_MBOX_RESP_CODE;
> +
> +/* Mailbox command list */
> +#define MBOX_RESTART 2
> +#define MBOX_QSPI_OPEN 50
> +#define MBOX_QSPI_CLOSE 51
> +#define MBOX_QSPI_DIRECT 59
> +
> +struct socfpga_mailbox {
> + u32 cin; /* command valid offset */
> + u32 rout; /* response output offset */
> + u32 urg; /* urgent command */
> + u32 flags; /* interrupt enables */
> + u32 pad_0x10_0x1f[4]; /* 0x10 - 0x1F reserved */
> + u32 cout; /* command free offset */
> + u32 rin; /* respond valid offset */
> + u32 pad_0x28; /* 0x28 reserved */
> + u32 status; /* mailbox status */
> + u32 pad_0x30_0x3f[4]; /* 0x30 - 0x3F reserved */
> + u32 cmd_buf[MBOX_CMD_BUFFER_SIZE]; /* 0x40 - 0xBC circular command
> + buffer to SDM */
> + u32 resp_buf[MBOX_RESP_BUFFER_SIZE]; /* 0xC0 - 0xFF circular
> + response buffer */
> +};
> +
> +/* Use define other than put into struct socfpga_mailbox to save spaces */
> +#define MBOX_DOORBELL_TO_SDM_REG (SOCFPGA_MAILBOX_ADDRESS + 0x400)
> +#define MBOX_DOORBELL_FROM_SDM_REG (SOCFPGA_MAILBOX_ADDRESS + 0x480)
> +
> +int mbox_init(void);
> +
> +#ifdef CONFIG_CADENCE_QSPI
> +int mbox_qspi_close(void);
> +int mbox_qspi_open(void);
> +#endif
> +
> +#endif /* _MAILBOX_S10_H_ */
> diff --git a/arch/arm/mach-socfpga/mailbox_s10.c
> b/arch/arm/mach-socfpga/mailbox_s10.c
> new file mode 100644
> index 0000000..de836b1
> --- /dev/null
> +++ b/arch/arm/mach-socfpga/mailbox_s10.c
> @@ -0,0 +1,238 @@
> +/*
> + * Copyright (C) 2017 Intel Corporation <www.intel.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0
> + */
> +
> +#include <common.h>
> +#include <wait_bit.h>
> +#include <asm/io.h>
> +#include <asm/arch/mailbox_s10.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +static const struct socfpga_mailbox *mbox_base =
> + (void *)SOCFPGA_MAILBOX_ADDRESS;
> +
> +#define MBOX_POLL_RESP_TIMEOUT 50 /* ms */
> +
> +static int mbox_polling_resp(u32 rout)
> +{
> + u32 rin;
> + unsigned long start = get_timer(0);
> +
> + while (1) {
> + rin = readl(&mbox_base->rin);
> + if (rout != rin)
> + return 0;
> +
> + if (get_timer(start) > MBOX_POLL_RESP_TIMEOUT)
> + break;
> +
> + udelay(1);
> + }
> +
> + debug("mailbox: polling response timeout\n");
> + return -ETIMEDOUT;
> +}
> +
> +/* Check for available slot and write to circular buffer.
> + * It also update command valid offset (cin) register.
> + */
> +static int mbox_fill_cmd_circular_buff(u32 header, u32 len, u32 *arg)
> +{
> + u32 cmd_free_offset;
> + u32 i;
> +
> + /* checking available command free slot */
> + cmd_free_offset = readl(&mbox_base->cout);
> + if (cmd_free_offset >= MBOX_CMD_BUFFER_SIZE) {
> + error("ERROR: Not enough space, cout %d\n", cmd_free_offset);
I'm getting these build error:
arch/arm/mach-socfpga/mailbox_s10.c: In function
‘mbox_fill_cmd_circular_buff’:
arch/arm/mach-socfpga/mailbox_s10.c:50:3: warning: implicit declaration
of function ‘error’ [-Wimplicit-function-declaration]
error("ERROR: Not enough space, cout %d\n", cmd_free_offset)
arch/arm/mach-socfpga/built-in.o: In function `mbox_send_cmd':
/home/dinguyen/linux_dev/u-boot/arch/arm/mach-socfpga/mailbox_s10.c:86:
undefined reference to `error'
Please at least do a compile test on your patches in the future.
Dinh
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
