Hi Stefan (and Stefan), On Tue, Aug 8, 2017 at 7:05 AM, Stefan Roese <s...@denx.de> wrote: > Hi Joe, > > On 11.07.2017 10:04, Stefan Roese wrote: >> >> On 21.06.2017 10:31, stef...@malvell.com wrote:
Huh? Sent from a typo email address? That's pretty tedious. I recommend fixing your git config. And if that's fine, I recommend using patman so this won't happen again. >>> >>> From: Stefan Chulski <stef...@marvell.com> >>> >>> Issues were found during internal QA phase. >>> >>> Stefan Chulski (10): >>> net: mvpp2x: Add GPIO configuration support >>> net: mvpp2x: fix phy connected to wrong mdio issue >>> net: mvpp2x: Enable GoP packet padding in TX >>> net: mvpp2x: fix BM configuration overrun issue >>> net: mvpp2x: decrease size of AGGR_TXQ and CPU_DESC_CHUNK >>> net: mvpp2x: remove MBUS configurations from MvPP22 driver >>> net: mvpp2x: Remove IRQ configuration from u-boot >>> net: mvpp2x: Set BM pool high address >>> net: mvpp2x: remove TX drain from transmit routine >>> net: mvpp2x: Set BM poll size once during priv probe >>> >>> drivers/net/mvpp2.c | 189 >>> ++++++++++++++++++++++++++-------------------------- >>> 1 file changed, 94 insertions(+), 95 deletions(-) >> >> >> Joe, do you have any comments on these mvpp2 patches? > > > Gently ping on these patches again. Joe, do you have any comments > on these? Do you want to take these patches via your tree? Or > should I push them if you don't have any objections? Reviewing now. I generally use patchwork to remember what I have to do. I guess if I didn't rely on that I would set up better work queue email filters. Sorry for the delay. I figured since the series is assigned to you in PW, that you wanted it through your tree. I'm fine either way. Cheers, -Joe _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
