Hi Joe,
On 11.07.2017 10:04, Stefan Roese wrote:
On 21.06.2017 10:31, stef...@malvell.com wrote:
From: Stefan Chulski <stef...@marvell.com>
Issues were found during internal QA phase.
Stefan Chulski (10):
net: mvpp2x: Add GPIO configuration support
net: mvpp2x: fix phy connected to wrong mdio issue
net: mvpp2x: Enable GoP packet padding in TX
net: mvpp2x: fix BM configuration overrun issue
net: mvpp2x: decrease size of AGGR_TXQ and CPU_DESC_CHUNK
net: mvpp2x: remove MBUS configurations from MvPP22 driver
net: mvpp2x: Remove IRQ configuration from u-boot
net: mvpp2x: Set BM pool high address
net: mvpp2x: remove TX drain from transmit routine
net: mvpp2x: Set BM poll size once during priv probe
drivers/net/mvpp2.c | 189
++++++++++++++++++++++++++--------------------------
1 file changed, 94 insertions(+), 95 deletions(-)
Joe, do you have any comments on these mvpp2 patches?
Gently ping on these patches again. Joe, do you have any comments
on these? Do you want to take these patches via your tree? Or
should I push them if you don't have any objections?
Thanks,
Stefan
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
