Hi Philipp, On 28 July 2017 at 13:22, Philipp Tomsich <philipp.toms...@theobroma-systems.com> wrote: > The GMAC in the RK3368 once again is identical to the incarnation in > the RK3288 and the RK3399, except for where some of the configuration > and control registers are located in the GRF. > > This adds the RK3368-specific logic necessary to reuse this driver. > > Signed-off-by: Philipp Tomsich <philipp.toms...@theobroma-systems.com> > > Acked-by: Joe Hershberger <joe.hershber...@ni.com> > --- > > Changes in v3: None > Changes in v2: > - moves the bit-definitions (for GRF registers) specific to the GMAC > into the GMAC driver: these include interface speed selection and > configuring the RGMII output mode > > arch/arm/include/asm/arch-rockchip/grf_rk3368.h | 1 + > drivers/net/gmac_rockchip.c | 78 > +++++++++++++++++++++++++ > 2 files changed, 79 insertions(+) >
Reviewed-by: Simon Glass <s...@chromium.org> I still think we should look at splitting these out into (e.g.) ioctl operations on syscon. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
