On Fri, 28 Jul 2017 21:22:32 +0200 Philipp Tomsich <philipp.toms...@theobroma-systems.com> wrote:
> With SPL_LDSCRIPT defined via Kconfig, we can run moveconfig... this > will touch every configuration that uses SPL, even if there was an > implicit resolution of the SPL_LDSCRIPT: now everything is explicit. > > Signed-off-by: Philipp Tomsich <philipp.toms...@theobroma-systems.com> > > --- > > Changes in v3: > - moveconfig.py CONFIG_SPL_LDSCRIPT > (Note: I really don't know whether this is what we want, as it's > making the SPL_LDSCRIPT resolution explicit for every board... > then again, I understood Tom's comment that moving things into > Kconfig should be the priority...) > > Changes in v2: None > > configs/A10-OLinuXino-Lime_defconfig | 1 + [...] > include/configs/zynq-common.h | 2 -- > 369 files changed, 313 insertions(+), 106 deletions(-) > > diff --git a/configs/A10-OLinuXino-Lime_defconfig > b/configs/A10-OLinuXino-Lime_defconfig > index 9143022..7d45c1d 100644 > --- a/configs/A10-OLinuXino-Lime_defconfig > +++ b/configs/A10-OLinuXino-Lime_defconfig > @@ -11,6 +11,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-olinuxino-lime" > CONFIG_AHCI=y > # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set > CONFIG_SPL=y > +CONFIG_SPL_LDSCRIPT="arch/arm/cpu/armv7/sunxi/u-boot-spl.lds" Why do we want to clutter board-specific config files with this information? If this is migrated to Kconfig, then we probably want to have reasonable SoC-specific defaults there and leave defconfigs alone. > CONFIG_SPL_I2C_SUPPORT=y > # CONFIG_CMD_IMLS is not set > # CONFIG_CMD_FLASH is not set -- Best regards, Siarhei Siamashka _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
