> On 28 Jul 2017, at 21:52, Siarhei Siamashka <siarhei.siamas...@gmail.com> > wrote: > > On Fri, 28 Jul 2017 21:22:32 +0200 > Philipp Tomsich <philipp.toms...@theobroma-systems.com> wrote: > >> With SPL_LDSCRIPT defined via Kconfig, we can run moveconfig... this >> will touch every configuration that uses SPL, even if there was an >> implicit resolution of the SPL_LDSCRIPT: now everything is explicit. >> >> Signed-off-by: Philipp Tomsich <philipp.toms...@theobroma-systems.com> >> >> --- >> >> Changes in v3: >> - moveconfig.py CONFIG_SPL_LDSCRIPT >> (Note: I really don't know whether this is what we want, as it's >> making the SPL_LDSCRIPT resolution explicit for every board... >> then again, I understood Tom's comment that moving things into >> Kconfig should be the priority...) >> >> Changes in v2: None >> >> configs/A10-OLinuXino-Lime_defconfig | 1 + > > [...] > >> include/configs/zynq-common.h | 2 -- >> 369 files changed, 313 insertions(+), 106 deletions(-) >> >> diff --git a/configs/A10-OLinuXino-Lime_defconfig >> b/configs/A10-OLinuXino-Lime_defconfig >> index 9143022..7d45c1d 100644 >> --- a/configs/A10-OLinuXino-Lime_defconfig >> +++ b/configs/A10-OLinuXino-Lime_defconfig >> @@ -11,6 +11,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-olinuxino-lime" >> CONFIG_AHCI=y >> # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set >> CONFIG_SPL=y >> +CONFIG_SPL_LDSCRIPT="arch/arm/cpu/armv7/sunxi/u-boot-spl.lds" > > Why do we want to clutter board-specific config files with this > information?
I do agree that this is not the preferable way of doing things and that this should be propagated back up through Kconfig. One possibility might be to add ‘default “…” if “…”’ entries either to the central Kconfig for SPL or to have these in the various machine-subdirectories. Let’s see if some consensus emerges from this... My plan was to skip this specific patch on the merge (which is the reason I kept the moveconfig-run as a separate commit), but keep it here as a point-of-reference. > If this is migrated to Kconfig, then we probably want to have > reasonable SoC-specific defaults there and leave defconfigs alone. > >> CONFIG_SPL_I2C_SUPPORT=y >> # CONFIG_CMD_IMLS is not set >> # CONFIG_CMD_FLASH is not set > > > -- > Best regards, > Siarhei Siamashka _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
