Use DIV_ROUND_UP instead RATE_TO_DIV for all Rockchip SoC
clock driver.
Signed-off-by: Kever Yang <kever.y...@rock-chips.com>
---
drivers/clk/rockchip/clk_rk3188.c | 7 ++-----
drivers/clk/rockchip/clk_rk322x.c | 3 ---
drivers/clk/rockchip/clk_rk3288.c | 5 +----
drivers/clk/rockchip/clk_rk3368.c | 7 ++-----
drivers/clk/rockchip/clk_rk3399.c | 2 +-
drivers/clk/rockchip/clk_rv1108.c | 3 ---
6 files changed, 6 insertions(+), 21 deletions(-)
diff --git a/drivers/clk/rockchip/clk_rk3188.c
b/drivers/clk/rockchip/clk_rk3188.c
index ecfd840..e1f0b65 100644
--- a/drivers/clk/rockchip/clk_rk3188.c
+++ b/drivers/clk/rockchip/clk_rk3188.c
@@ -71,9 +71,6 @@ enum {
SOCSTS_GPLL_LOCK = 1 << 8,
};
-#define RATE_TO_DIV(input_rate, output_rate) \
- ((input_rate) / (output_rate) - 1);
-
#define DIV_TO_RATE(input_rate, div) ((input_rate) / ((div) + 1))
#define PLL_DIVISORS(hz, _nr, _no) {\
@@ -350,7 +347,7 @@ static ulong rockchip_spi_get_clk(struct rk3188_cru *cru,
uint gclk_rate,
static ulong rockchip_spi_set_clk(struct rk3188_cru *cru, uint gclk_rate,
int periph, uint freq)
{
- int src_clk_div = RATE_TO_DIV(gclk_rate, freq);
+ int src_clk_div = DIV_ROUND_UP(gclk_rate, freq) - 1;
switch (periph) {
case SCLK_SPI0:
@@ -400,7 +397,7 @@ static void rkclk_init(struct rk3188_cru *cru, struct
rk3188_grf *grf,
* reparent aclk_cpu_pre from apll to gpll
* set up dependent divisors for PCLK/HCLK and ACLK clocks.
*/
- aclk_div = RATE_TO_DIV(GPLL_HZ, CPU_ACLK_HZ);
+ aclk_div = DIV_ROUND_UP(GPLL_HZ, CPU_ACLK_HZ);
assert((aclk_div + 1) * CPU_ACLK_HZ == GPLL_HZ && aclk_div < 0x1f);
rk_clrsetreg(&cru->cru_clksel_con[0],
diff --git a/drivers/clk/rockchip/clk_rk322x.c
b/drivers/clk/rockchip/clk_rk322x.c
index b50a852..43b3f4b 100644
--- a/drivers/clk/rockchip/clk_rk322x.c
+++ b/drivers/clk/rockchip/clk_rk322x.c
@@ -26,9 +26,6 @@ enum {
OUTPUT_MIN_HZ = 24 * 1000000,
};
-#define RATE_TO_DIV(input_rate, output_rate) \
- ((input_rate) / (output_rate) - 1);
-
#define DIV_TO_RATE(input_rate, div) ((input_rate) / ((div) + 1))
#define PLL_DIVISORS(hz, _refdiv, _postdiv1, _postdiv2) {\
diff --git a/drivers/clk/rockchip/clk_rk3288.c
b/drivers/clk/rockchip/clk_rk3288.c
index adcc0a6..8f6df55 100644
--- a/drivers/clk/rockchip/clk_rk3288.c
+++ b/drivers/clk/rockchip/clk_rk3288.c
@@ -118,9 +118,6 @@ enum {
SOCSTS_NPLL_LOCK = 1 << 9,
};
-#define RATE_TO_DIV(input_rate, output_rate) \
- ((input_rate) / (output_rate) - 1);
-
#define DIV_TO_RATE(input_rate, div) ((input_rate) / ((div) + 1))
#define PLL_DIVISORS(hz, _nr, _no) {\
@@ -608,7 +605,7 @@ static ulong rockchip_spi_set_clk(struct rk3288_cru *cru,
uint gclk_rate,
int src_clk_div;
debug("%s: clk_general_rate=%u\n", __func__, gclk_rate);
- src_clk_div = RATE_TO_DIV(gclk_rate, freq);
+ src_clk_div = DIV_ROUND_UP(gclk_rate, freq) - 1;
switch (periph) {
case SCLK_SPI0:
rk_clrsetreg(&cru->cru_clksel_con[25],
diff --git a/drivers/clk/rockchip/clk_rk3368.c
b/drivers/clk/rockchip/clk_rk3368.c
index 52cad38..c067fa1 100644
--- a/drivers/clk/rockchip/clk_rk3368.c
+++ b/drivers/clk/rockchip/clk_rk3368.c
@@ -30,9 +30,6 @@ struct pll_div {
#define GPLL_HZ (576 * 1000 * 1000)
#define CPLL_HZ (400 * 1000 * 1000)
-#define RATE_TO_DIV(input_rate, output_rate) \
- ((input_rate) / (output_rate) - 1);
-
#define DIV_TO_RATE(input_rate, div) ((input_rate) / ((div) + 1))
#define PLL_DIVISORS(hz, _nr, _no) { \
@@ -171,7 +168,7 @@ static ulong rk3368_mmc_set_clk(struct rk3368_cru *cru,
u32 con_id;
u32 gpll_rate = rkclk_pll_get_rate(cru, GPLL);
- div = RATE_TO_DIV(gpll_rate, rate << 1);
+ div = DIV_ROUND_UP(gpll_rate, rate << 1) - 1;
switch (clk_id) {
case SCLK_SDMMC:
@@ -188,7 +185,7 @@ static ulong rk3368_mmc_set_clk(struct rk3368_cru *cru,
}
if (div > 0x3f) {
- div = RATE_TO_DIV(OSC_HZ, rate);
+ div = DIV_ROUND_UP(OSC_HZ, rate) - 1;
rk_clrsetreg(&cru->clksel_con[con_id],
MMC_PLL_SEL_MASK | MMC_CLK_DIV_MASK,
(MMC_PLL_SEL_24M << MMC_PLL_SEL_SHIFT) |
diff --git a/drivers/clk/rockchip/clk_rk3399.c
b/drivers/clk/rockchip/clk_rk3399.c
index 40cbfea..e3f663a 100644
--- a/drivers/clk/rockchip/clk_rk3399.c
+++ b/drivers/clk/rockchip/clk_rk3399.c
@@ -676,7 +676,7 @@ static ulong rk3399_spi_set_clk(struct rk3399_cru *cru,
ulong clk_id, uint hz)
const struct spi_clkreg *spiclk = NULL;
int src_clk_div;
- src_clk_div = RATE_TO_DIV(GPLL_HZ, hz);
+ src_clk_div = DIV_ROUND_UP(GPLL_HZ, hz) - 1;
assert(src_clk_div < 127);
switch (clk_id) {
diff --git a/drivers/clk/rockchip/clk_rv1108.c
b/drivers/clk/rockchip/clk_rv1108.c
index 818293d..cf966bb 100644
--- a/drivers/clk/rockchip/clk_rv1108.c
+++ b/drivers/clk/rockchip/clk_rv1108.c
@@ -25,9 +25,6 @@ enum {
OUTPUT_MIN_HZ = 24 * 1000000,
};
-#define RATE_TO_DIV(input_rate, output_rate) \
- ((input_rate) / (output_rate) - 1);
-
#define DIV_TO_RATE(input_rate, div) ((input_rate) / ((div) + 1))
#define PLL_DIVISORS(hz, _refdiv, _postdiv1, _postdiv2) {\
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
