On 17/07/2017 23:39, Adam Ford wrote:
On Mon, Jul 17, 2017 at 3:29 PM, Jean-Jacques Hiblot <jjhib...@ti.com> wrote:
On 14/07/2017 15:18, Adam Ford wrote:
On Thu, Jul 13, 2017 at 2:22 AM, Jean-Jacques Hiblot <jjhib...@ti.com>
wrote:
On 12/07/2017 19:30, Tom Rini wrote:
On Tue, Jul 11, 2017 at 06:20:09PM +0200, Jean-Jacques Hiblot wrote:
This series enables the ADMA present in some OMAP SOCs.
On a DRA7 the performances when reading from the eMMC go from 20MB/s
to 40MB/s.
Also while were at it, fix some incorrect bit operations
This is the first series of 3 which wille enable HS200 and UHS on the
omap5
platforms (dra7 and am57).
This series applies on u-boot-mmc/hs200-ufs-testing although it could
be
modified to apply on u-boot/master.
What hardware have you runtime tested this on? If you haven't done
omap3, I can do some run-time testing there. Thanks!
I haven't been able to test on omap3.
I did BBB, am437x SK, AM57X evm and DRA7 evm.
I had to fix some other SPL issues first and once I was able to do
that, I applied this 5-patch series and tested on DM3730 booting with
SPL using Device Tree in U-boot. (I might still be the only OMAP3
board which enables CONFIG_OF_CONTROL=y).
The only compile concern I found was:
CC drivers/usb/gadget/f_fastboot.o
drivers/mmc/omap_hsmmc.c: In function ‘omap_hsmmc_send_cmd’:
drivers/mmc/omap_hsmmc.c:486:14: warning: unused variable ‘mmc’
[-Wunused-variable]
struct mmc *mmc = upriv->mmc;
^~~
LD board/logicpd/omap3som/built-in.o
CC lib/smbios.o
However, my board booted correctly via SD card.
Thanks for testing. I'll fix the warning in the next version
no problem.
For what it's worth, someone from TI asked me not to use the #ifdef to
set the base address offsets. I originally did your way, and it was
rejected. You might want to make sure that everyone at TI is on
board.
I understand how it feels. But it's a bit more than just changing the
base address. There are actually new registers defined in this area,
that do not exist on omap3.
JJ
adam
JJ
adam
JJ
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
