On 14/07/2017 15:18, Adam Ford wrote:
On Thu, Jul 13, 2017 at 2:22 AM, Jean-Jacques Hiblot <jjhib...@ti.com> wrote:
On 12/07/2017 19:30, Tom Rini wrote:
On Tue, Jul 11, 2017 at 06:20:09PM +0200, Jean-Jacques Hiblot wrote:
This series enables the ADMA present in some OMAP SOCs.
On a DRA7 the performances when reading from the eMMC go from 20MB/s
to 40MB/s.
Also while were at it, fix some incorrect bit operations
This is the first series of 3 which wille enable HS200 and UHS on the
omap5
platforms (dra7 and am57).
This series applies on u-boot-mmc/hs200-ufs-testing although it could be
modified to apply on u-boot/master.
What hardware have you runtime tested this on? If you haven't done
omap3, I can do some run-time testing there. Thanks!
I haven't been able to test on omap3.
I did BBB, am437x SK, AM57X evm and DRA7 evm.
I had to fix some other SPL issues first and once I was able to do
that, I applied this 5-patch series and tested on DM3730 booting with
SPL using Device Tree in U-boot. (I might still be the only OMAP3
board which enables CONFIG_OF_CONTROL=y).
The only compile concern I found was:
CC drivers/usb/gadget/f_fastboot.o
drivers/mmc/omap_hsmmc.c: In function ‘omap_hsmmc_send_cmd’:
drivers/mmc/omap_hsmmc.c:486:14: warning: unused variable ‘mmc’
[-Wunused-variable]
struct mmc *mmc = upriv->mmc;
^~~
LD board/logicpd/omap3som/built-in.o
CC lib/smbios.o
However, my board booted correctly via SD card.
Thanks for testing. I'll fix the warning in the next version
JJ
adam
JJ
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
