> From: Tom [mailto:tom....@windriver.com] > Sent: Thursday, November 12, 2009 11:30 AM > > Paulraj, Sandeep wrote: > >>>> Introduce Micron DDR timings and provide > >>>> CONFIG_OMAP3_INFINEON_DDR and CONFIG_OMAP3_MICRON_DDR config > >>>> options to allow for platform files to setup their timings as > >>>> per the type of DDR selected > >>>> > >>>> Reported-by: Steve Sakoman in > >>>> > >> > http://www.nabble.com/forum/Permalink.jtp?root=25779518&post=25959734&page > >>>> =y > >>>> > >>>> Signed-off-by: Nishanth Menon <n...@ti.com> > >>>> --- > >>>> include/asm-arm/arch-omap3/mem.h | 88 > >> ++++++++++++++++++++++++++++++--- > >>>> ----- > >>>> include/configs/devkit8000.h | 3 + > >>>> include/configs/omap3_beagle.h | 3 + > >>>> include/configs/omap3_evm.h | 3 + > >>>> include/configs/omap3_overo.h | 3 + > >>>> include/configs/omap3_pandora.h | 3 + > >>>> include/configs/omap3_sdp3430.h | 3 + > >>>> include/configs/omap3_zoom1.h | 3 + > >>>> include/configs/omap3_zoom2.h | 3 + > >>>> 9 files changed, 94 insertions(+), 18 deletions(-) > >>>> > >>> Pushed to u-boot-ti/next > >>> > >>> I think this series from Nishanth needs some runtime tests. > >>> I believe Steve had some issues with his EVM not booting everytime due > >> to issues with DDR init. > >>> Thanks, > >>> Sandeep > >> Maybe it should go on the testing branch? > >> > >> I will give zoom2 a try.. > >> > >> Tom > >> > > > > Tom, Dirk, Steve, > > > > Did u get a chance to try? > > > > I am seeing a lot of OMAP3 patches which seem to be touching the above > mentioned headers files. > > > For zoom2. > I warm booted the kernel with ti/next. > So it looks ok for zoom2 u-boot-ti Ok for SDP3430.
Regards, Nishanth Menon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot