On Mon, Nov 9, 2009 at 5:13 AM, Tom <tom....@windriver.com> wrote: > Steve Sakoman wrote: >> >> On Sat, Nov 7, 2009 at 10:15 AM, Paulraj, Sandeep <s-paul...@ti.com> >> wrote: >>>>>> >>>>>> Introduce Micron DDR timings and provide >>>>>> CONFIG_OMAP3_INFINEON_DDR and CONFIG_OMAP3_MICRON_DDR config >>>>>> options to allow for platform files to setup their timings as >>>>>> per the type of DDR selected >>>>>> >>>>>> Reported-by: Steve Sakoman in >>>>>> >>>> >>>> http://www.nabble.com/forum/Permalink.jtp?root=25779518&post=25959734&page >>>>>> >>>>>> =y >>>>>> >>>>>> Signed-off-by: Nishanth Menon <n...@ti.com> >>>>>> --- >>>>>> include/asm-arm/arch-omap3/mem.h | 88 >>>> >>>> ++++++++++++++++++++++++++++++--- >>>>>> >>>>>> ----- >>>>>> include/configs/devkit8000.h | 3 + >>>>>> include/configs/omap3_beagle.h | 3 + >>>>>> include/configs/omap3_evm.h | 3 + >>>>>> include/configs/omap3_overo.h | 3 + >>>>>> include/configs/omap3_pandora.h | 3 + >>>>>> include/configs/omap3_sdp3430.h | 3 + >>>>>> include/configs/omap3_zoom1.h | 3 + >>>>>> include/configs/omap3_zoom2.h | 3 + >>>>>> 9 files changed, 94 insertions(+), 18 deletions(-) >>>>>> >>>>> Pushed to u-boot-ti/next >>>>> >>>>> I think this series from Nishanth needs some runtime tests. >>>>> I believe Steve had some issues with his EVM not booting everytime due >>>> >>>> to issues with DDR init. >>>>> >>>>> Thanks, >>>>> Sandeep >>>> >>>> Maybe it should go on the testing branch? >>>> >>>> I will give zoom2 a try.. >>>> >>>> Tom >>>> >>> Nishanth has already tried on SDP 3430. >>> I think the board that needs to be tried is overo. >> >> Correct, it was Overo, though I suspect Beagle might have the same >> issue since they use the same Micron POP memory. I'll try to test >> this weekend. >> >> Steve > > I can try that too. > > Did you see the problem on warm or cold booting?
IIRC, it was an issue with both warm and cold boots. Steve _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
