On Sat, Nov 7, 2009 at 10:15 AM, Paulraj, Sandeep <s-paul...@ti.com> wrote: > >> >> >> >> Introduce Micron DDR timings and provide >> >> CONFIG_OMAP3_INFINEON_DDR and CONFIG_OMAP3_MICRON_DDR config >> >> options to allow for platform files to setup their timings as >> >> per the type of DDR selected >> >> >> >> Reported-by: Steve Sakoman in >> >> >> http://www.nabble.com/forum/Permalink.jtp?root=25779518&post=25959734&page >> >> =y >> >> >> >> Signed-off-by: Nishanth Menon <n...@ti.com> >> >> --- >> >> include/asm-arm/arch-omap3/mem.h | 88 >> ++++++++++++++++++++++++++++++--- >> >> ----- >> >> include/configs/devkit8000.h | 3 + >> >> include/configs/omap3_beagle.h | 3 + >> >> include/configs/omap3_evm.h | 3 + >> >> include/configs/omap3_overo.h | 3 + >> >> include/configs/omap3_pandora.h | 3 + >> >> include/configs/omap3_sdp3430.h | 3 + >> >> include/configs/omap3_zoom1.h | 3 + >> >> include/configs/omap3_zoom2.h | 3 + >> >> 9 files changed, 94 insertions(+), 18 deletions(-) >> >> >> > >> > Pushed to u-boot-ti/next >> > >> > I think this series from Nishanth needs some runtime tests. >> > I believe Steve had some issues with his EVM not booting everytime due >> to issues with DDR init. >> > >> > Thanks, >> > Sandeep >> >> Maybe it should go on the testing branch? >> >> I will give zoom2 a try.. >> >> Tom >> > Nishanth has already tried on SDP 3430. > I think the board that needs to be tried is overo.
Correct, it was Overo, though I suspect Beagle might have the same issue since they use the same Micron POP memory. I'll try to test this weekend. Steve _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
