On Mon, May 22, 2017 at 11:51 PM, Álvaro Fernández Rojas <nolt...@gmail.com> wrote: > Command bytes are part of the written bytes and they should be taken into > account when sending a spi transfer. > > Signed-off-by: Álvaro Fernández Rojas <nolt...@gmail.com> > --- > v2: Introduce changes requested by Simon Glass: > - Always include command bytes when determining max write size. > > drivers/mtd/spi/spi_flash.c | 2 +- > include/spi.h | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c > index e44c10f..5b8cbc9 100644 > --- a/drivers/mtd/spi/spi_flash.c > +++ b/drivers/mtd/spi/spi_flash.c > @@ -380,7 +380,7 @@ int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 > offset, > > if (spi->max_write_size) > chunk_len = min(chunk_len, > - (size_t)spi->max_write_size); > + spi->max_write_size - len);
This can be squashed with 01/10 with proper commit message? thanks! -- Jagan Teki Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream Maintainer Hyderabad, India. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
