The Cubox-i and Hummingboard series of devices have an option of
SATA on board, and depending on how the fuses are blown even the
option to boot SPL from SATA. So enable support for it so it can
be used to boot the OS from if people desire.
Signed-off-by: Peter Robinson <pbrobin...@gmail.com>
---
board/solidrun/mx6cuboxi/mx6cuboxi.c | 7 +++++++
configs/mx6cuboxi_defconfig | 23 ++++++++++++-----------
include/configs/mx6cuboxi.h | 11 +++++++++++
3 files changed, 30 insertions(+), 11 deletions(-)
diff --git a/board/solidrun/mx6cuboxi/mx6cuboxi.c
b/board/solidrun/mx6cuboxi/mx6cuboxi.c
index 285588d80a..59a78dfa6a 100644
--- a/board/solidrun/mx6cuboxi/mx6cuboxi.c
+++ b/board/solidrun/mx6cuboxi/mx6cuboxi.c
@@ -22,6 +22,7 @@
#include <linux/errno.h>
#include <asm/gpio.h>
#include <asm/imx-common/iomux-v3.h>
+#include <asm/imx-common/sata.h>
#include <asm/imx-common/video.h>
#include <mmc.h>
#include <fsl_esdhc.h>
@@ -314,6 +315,12 @@ int board_early_init_f(void)
ret = setup_display();
#endif
+#ifdef CONFIG_CMD_SATA
+ /* Only mx6q/mx6q has SATA */
+ if (is_mx6dq())
+ setup_sata();
+#endif
+
#ifdef CONFIG_USB_EHCI_MX6
setup_usb();
#endif
diff --git a/configs/mx6cuboxi_defconfig b/configs/mx6cuboxi_defconfig
index c34beb74e2..ca5f5189f6 100644
--- a/configs/mx6cuboxi_defconfig
+++ b/configs/mx6cuboxi_defconfig
@@ -1,30 +1,31 @@
CONFIG_ARM=y
CONFIG_ARCH_MX6=y
+CONFIG_TARGET_MX6CUBOXI=y
+CONFIG_SPL=y
+CONFIG_SPL_EXT_SUPPORT=y
CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_TARGET_MX6CUBOXI=y
CONFIG_SPL_MMC_SUPPORT=y
+# CONFIG_SPL_PARTITION_UUIDS is not set
CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
-# CONFIG_CMD_BMODE is not set
CONFIG_VIDEO=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL"
# CONFIG_SYS_STDIO_DEREGISTER is not set
CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SPL=y
-CONFIG_SPL_EXT_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_BMODE is not set
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT4_WRITE=y
# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+# CONFIG_CMD_IMLS is not set
CONFIG_CMD_MMC=y
+CONFIG_CMD_SATA=y
CONFIG_CMD_USB=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT4_WRITE=y
-# CONFIG_SPL_PARTITION_UUIDS is not set
CONFIG_DM=y
CONFIG_DM_THERMAL=y
CONFIG_USB=y
diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h
index 84fdf656cd..be071769fc 100644
--- a/include/configs/mx6cuboxi.h
+++ b/include/configs/mx6cuboxi.h
@@ -21,6 +21,16 @@
/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
+/* SATA Configuration */
+#ifdef CONFIG_CMD_SATA
+#define CONFIG_DWC_AHSATA
+#define CONFIG_SYS_SATA_MAX_DEVICE 1
+#define CONFIG_DWC_AHSATA_PORT_ID 0
+#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
+#define CONFIG_LBA48
+#define CONFIG_LIBATA
+#endif
+
/* Ethernet Configuration */
#define CONFIG_FEC_MXC
#define CONFIG_MII
@@ -119,6 +129,7 @@
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0) \
+ func(SATA, sata, 0) \
func(USB, usb, 0) \
func(PXE, pxe, na) \
func(DHCP, dhcp, na)
--
2.13.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
