On Thu, Apr 6, 2017 at 7:29 AM, Peng Fan <van.free...@gmail.com> wrote: > On Mon, Apr 03, 2017 at 07:23:14PM +0530, Jagan Teki wrote: >>From: Jagan Teki <ja...@amarulasolutions.com> >> >>Add initial dts support for i.MX6 Quad Plus Sabresd board. >> >>Boot from MMC: >>------------- >>U-Boot SPL 2017.03-33690-ga80e4f6-dirty (Mar 30 2017 - 00:40:29) >>Trying to boot from MMC1 >> >>U-Boot 2017.03-33690-ga80e4f6-dirty (Mar 30 2017 - 00:40:29 +0530) >> >>CPU: Freescale i.MX6QP rev1.0 996 MHz (running at 792 MHz) >>CPU: Automotive temperature grade (-40C to 125C) at 29C >>Reset cause: POR >>Model: Freescale i.MX6 Quad Plus SABRE Smart Device Board >>Board: MX6-SabreSD >>I2C: ready >>DRAM: 1 GiB >>PMIC: PFUZE100 ID=0x10 >>MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 >>*** Warning - bad CRC, using default environment >> >>gpio@020a4000: dir_output: error: gpio GPIO3_19 not reserved >>gpio@020a4000: set_value: error: gpio GPIO3_19 not reserved >>gpio@020b4000: dir_output: error: gpio GPIO7_12 not reserved >>gpio@020b4000: set_value: error: gpio GPIO7_12 not reserved >>PCI: pcie phy link never came up >>No panel detected: default to Hannstar-XGA >>gpio@0209c000: dir_output: error: gpio GPIO1_21 not reserved >>Display: Hannstar-XGA (1024x768) >>In: serial >>Out: serial >>Err: serial >>Net: gpio@0209c000: dir_output: error: gpio GPIO1_25 not reserved >>gpio@0209c000: set_value: error: gpio GPIO1_25 not reserved >>FEC [PRIME] >>Hit any key to stop autoboot: 0 >>=> >> >>Cc: Stefano Babic <sba...@denx.de> >>Cc: Fabio Estevam <fabio.este...@nxp.com> >>Cc: Michael Trimarchi <mich...@amarulasolutions.com> >>Signed-off-by: Jagan Teki <ja...@amarulasolutions.com> >>--- >> board/freescale/mx6sabresd/MAINTAINERS | 1 + >> configs/imx6qp_sabresd_defconfig | 60 >> ++++++++++++++++++++++++++++++++++ > > Could this be renamed to imx6qp_sabresd_spl_defconfig?
See my 28/29 patch comment, We are not keeping non-spl so there is no need to explicitly specify the name _spl thanks! -- Jagan Teki Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream Maintainer Hyderabad, India. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
