On Tue, Apr 4, 2017 at 12:46 AM, Fabio Estevam <feste...@gmail.com> wrote: > On Mon, Apr 3, 2017 at 10:53 AM, Jagan Teki <ja...@openedev.com> wrote: >> From: Jagan Teki <ja...@amarulasolutions.com> >> >> Add initial dts support for i.MX6 Quad Plus Sabresd board. >> >> Boot from MMC: >> ------------- >> U-Boot SPL 2017.03-33690-ga80e4f6-dirty (Mar 30 2017 - 00:40:29) >> Trying to boot from MMC1 >> >> U-Boot 2017.03-33690-ga80e4f6-dirty (Mar 30 2017 - 00:40:29 +0530) >> >> CPU: Freescale i.MX6QP rev1.0 996 MHz (running at 792 MHz) >> CPU: Automotive temperature grade (-40C to 125C) at 29C >> Reset cause: POR >> Model: Freescale i.MX6 Quad Plus SABRE Smart Device Board >> Board: MX6-SabreSD >> I2C: ready >> DRAM: 1 GiB >> PMIC: PFUZE100 ID=0x10 >> MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 >> *** Warning - bad CRC, using default environment >> >> gpio@020a4000: dir_output: error: gpio GPIO3_19 not reserved >> gpio@020a4000: set_value: error: gpio GPIO3_19 not reserved >> gpio@020b4000: dir_output: error: gpio GPIO7_12 not reserved >> gpio@020b4000: set_value: error: gpio GPIO7_12 not reserved > > Do you plan to fix these errors?
Yes the subsequent patches are fixing these, see 0000-cover-letter for final u-boot print. thanks! -- Jagan Teki Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream Maintainer Hyderabad, India. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
