From: Jagan Teki <ja...@amarulasolutions.com> Add initial devicetree support for i.MX6 DualLite Sabresd board.
Cc: Stefano Babic <sba...@denx.de> Cc: Fabio Estevam <fabio.este...@nxp.com> Cc: Michael Trimarchi <mich...@amarulasolutions.com> Signed-off-by: Jagan Teki <ja...@amarulasolutions.com> --- board/freescale/mx6sabresd/MAINTAINERS | 1 + configs/imx6dl_sabresd_defconfig | 68 ++++++++++++++++++++++++++++++++++ 2 files changed, 69 insertions(+) create mode 100644 configs/imx6dl_sabresd_defconfig diff --git a/board/freescale/mx6sabresd/MAINTAINERS b/board/freescale/mx6sabresd/MAINTAINERS index 40507f8..5efc795 100644 --- a/board/freescale/mx6sabresd/MAINTAINERS +++ b/board/freescale/mx6sabresd/MAINTAINERS @@ -6,5 +6,6 @@ F: include/configs/mx6sabresd.h F: configs/mx6dlsabresd_defconfig F: configs/mx6qsabresd_defconfig F: configs/mx6sabresd_spl_defconfig +F: configs/imx6dl_sabresd_defconfig F: configs/imx6q_sabresd_defconfig F: configs/imx6qp_sabresd_defconfig diff --git a/configs/imx6dl_sabresd_defconfig b/configs/imx6dl_sabresd_defconfig new file mode 100644 index 0000000..20dc1e0 --- /dev/null +++ b/configs/imx6dl_sabresd_defconfig @@ -0,0 +1,68 @@ +CONFIG_ARM=y +CONFIG_ARCH_MX6=y +CONFIG_SPL_GPIO_SUPPORT=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_TARGET_MX6SABRESD=y +CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_LIBDISK_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_VIDEO=y +CONFIG_DEFAULT_DEVICE_TREE="imx6dl-sabresd" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" +CONFIG_BOOTDELAY=3 +# CONFIG_CONSOLE_MUX is not set +CONFIG_SYS_CONSOLE_IS_IN_ENV=y +CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y +CONFIG_SPL=y +CONFIG_SPL_EXT_SUPPORT=y +CONFIG_SPL_OS_BOOT=y +CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_PCI=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_MX6=y +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_CI_UDC=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_G_DNL_MANUFACTURER="FSL" +CONFIG_G_DNL_VENDOR_NUM=0x0525 +CONFIG_G_DNL_PRODUCT_NUM=0xa4a5 +# CONFIG_VIDEO_SW_CURSOR is not set +CONFIG_OF_LIBFDT=y +CONFIG_OF_CONTROL=y +CONFIG_DM_ETH=y +CONFIG_DM_I2C=y +CONFIG_DM_GPIO=y +CONFIG_DM_MMC=y +CONFIG_DM_PMIC=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_USB=y +# CONFIG_BLK is not set +# CONFIG_DM_MMC_OPS is not set +CONFIG_DM_PMIC_PFUZE100=y +CONFIG_SYS_I2C_MXC=y +CONFIG_FEC_MXC=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX6=y -- 1.9.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
