i will use fdt commands to pass down the serial version of the board..
On Sun, Apr 2, 2017 at 6:07 PM, Andy Ng <andreas2...@gmail.com> wrote: > Hi, > > I am using u-boot 2016-07 for imx6. My linux kernel is 4.1.20. I am > using a board from Freescale SabreSD with the big screen. > The problem i noticed is that in the kernel /proc/cpuinfo the > "Revision" and Serial " comes up with "0" > > The kernel gets those values from atags, but when FDT is used it seems > that those atags dont get populated > > the image i produced for the SD card comes from official Freescale > release. no changes. It seems to me that "Revision and Serial" are > broken. > > If you run Imx6 latest u-boot/kernel code could you please check your > /proc/cpuinfo please? Do you see "zeros" at Revision and Serial? > > Any advise will be very much appreciated. > > Thanks > Andy _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
