Hi, I am using u-boot 2016-07 for imx6. My linux kernel is 4.1.20. I am using a board from Freescale SabreSD with the big screen. The problem i noticed is that in the kernel /proc/cpuinfo the "Revision" and Serial " comes up with "0"
The kernel gets those values from atags, but when FDT is used it seems that those atags dont get populated the image i produced for the SD card comes from official Freescale release. no changes. It seems to me that "Revision and Serial" are broken. If you run Imx6 latest u-boot/kernel code could you please check your /proc/cpuinfo please? Do you see "zeros" at Revision and Serial? Any advise will be very much appreciated. Thanks Andy _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot