Hi,

On 23 March 2017 at 17:41, Heiko Stuebner <he...@sntech.de> wrote:
> The Rock is a RK3188 based single board computer by Radxa.
> Currently it still relies on the proprietary DDR init and
> cannot use the generic SPL, but at least is able to boot
> a linux kernel and system up to a regular login prompt.
>
> Signed-off-by: Heiko Stuebner <he...@sntech.de>
> Reviewed-by: Simon Glass <s...@chromium.org>
> Tested-by: Kever Yang <kever.y...@rock-chips.com>
> ---
>  arch/arm/dts/Makefile                 |   1 +
>  arch/arm/dts/rk3188-radxarock.dts     | 382 
> ++++++++++++++++++++++++++++++++++
>  arch/arm/mach-rockchip/rk3188/Kconfig |  11 +
>  board/radxa/rock/Kconfig              |  15 ++
>  board/radxa/rock/MAINTAINERS          |   6 +
>  board/radxa/rock/Makefile             |   7 +
>  board/radxa/rock/rock.c               |   7 +
>  configs/rock_defconfig                |  58 ++++++
>  include/configs/rock.h                |  30 +++
>  9 files changed, 517 insertions(+)
>  create mode 100644 arch/arm/dts/rk3188-radxarock.dts
>  create mode 100644 board/radxa/rock/Kconfig
>  create mode 100644 board/radxa/rock/MAINTAINERS
>  create mode 100644 board/radxa/rock/Makefile
>  create mode 100644 board/radxa/rock/rock.c
>  create mode 100644 configs/rock_defconfig
>  create mode 100644 include/configs/rock.h

I am still having trouble applying this patch. I get build errors:

       arm:  +   rock
+arch/arm/Makefile:22: CONFIG_CPU_V7  -march=armv7-a
+make[2]: *** No rule to make target 'dts/dt.dtb', needed by
'tpl/u-boot-tpl.dtb'.  Stop.
+make[1]: *** [tpl/u-boot-tpl.bin] Error 2
+make: *** [sub-make] Error 2
    0    0    1 /1      rock

Also there seems to be a duplicate config:

       arm:  +   rock
+In file included from include/configs/rock.h:11:0,
+                 from include/config.h:5,
+                 from include/common.h:21,
+                 from arch/arm/lib/asm-offsets.c:15:
+ #define CONFIG_SYS_THUMB_BUILD
+ ^
+                 from lib/asm-offsets.c:15:
+In file included from include/linux/kconfig.h:4:0,
+                 from <command-line>:0:
+include/generated/autoconf.h:10:0: note: this is the location of the
previous definition
+ #define CONFIG_SYS_THUMB_BUILD 1


What toolchain are you using to build this?

Regards,
Simon
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to