On 2/6/2017 3:06 PM, Roger Quadros wrote: > In stead of defining the board EEPROM address in the board headers > let's define them in the board config files and make them > configurable by Kconfig. > > Signed-off-by: Roger Quadros <rog...@ti.com> > --- > board/ti/common/Kconfig | 14 ++++++++++++++ > board/ti/ks2_evm/Kconfig | 2 ++ > include/configs/am57xx_evm.h | 4 ---- > include/configs/dra7xx_evm.h | 4 ---- > 4 files changed, 16 insertions(+), 8 deletions(-) > > diff --git a/board/ti/common/Kconfig b/board/ti/common/Kconfig > index 4980a04..5003484 100644 > --- a/board/ti/common/Kconfig > +++ b/board/ti/common/Kconfig > @@ -1,3 +1,5 @@ > +if ARCH_OMAP2 > + > config SPL_ENV_SUPPORT > default y
You might want to keep TI_I2C_BOARD_DETECT out of ARCH_OMAP2 or else it will not be included for K2 platforms. Thanks and regards, Lokesh > > @@ -39,3 +41,15 @@ config SPL_POWER_SUPPORT > > config SPL_SERIAL_SUPPORT > default y > + > +endif > + > +config EEPROM_BUS_ADDRESS > + int "Board EEPROM's I2C bus address" > + range 0 8 > + default 0 > + > +config EEPROM_CHIP_ADDRESS > + hex "Board EEPROM's I2C chip address" > + range 0 0xff > + default 0x50 > diff --git a/board/ti/ks2_evm/Kconfig b/board/ti/ks2_evm/Kconfig > index c0568ec..9477f53 100644 > --- a/board/ti/ks2_evm/Kconfig > +++ b/board/ti/ks2_evm/Kconfig > @@ -49,3 +49,5 @@ config SYS_CONFIG_NAME > default "k2g_evm" > > endif > + > +source "board/ti/common/Kconfig" > diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h > index 840502c..d9e1119 100644 > --- a/include/configs/am57xx_evm.h > +++ b/include/configs/am57xx_evm.h > @@ -105,10 +105,6 @@ > #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ > CONFIG_SYS_SCSI_MAX_LUN) > > -/* EEPROM */ > -#define CONFIG_EEPROM_CHIP_ADDRESS 0x50 > -#define CONFIG_EEPROM_BUS_ADDRESS 0 > - > /* > * Default to using SPI for environment, etc. > * 0x000000 - 0x040000 : QSPI.SPL (256KiB) > diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h > index da458a4..46beb8b 100644 > --- a/include/configs/dra7xx_evm.h > +++ b/include/configs/dra7xx_evm.h > @@ -264,8 +264,4 @@ > #endif > #endif /* NOR support */ > > -/* EEPROM */ > -#define CONFIG_EEPROM_CHIP_ADDRESS 0x50 > -#define CONFIG_EEPROM_BUS_ADDRESS 0 > - > #endif /* __CONFIG_DRA7XX_EVM_H */ > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
