Nishanth Menon wrote:
> This modification is NOT tested on any of the
> platforms modified as I dont have them. please
> help by testing+building+fixing
On the testing front..
Regression testing on MAKEALL shows
#warning Ethernet driver .. error killing for
assabet, gcplus, lubbock, omap1510inn, omap1610h2,
omap2420h4, omap3_sdp3430, omap5912osk and omap730p2
There is a regression on B2.
et/libnet.a(net.o): In function `NetSendPacket':
u-boot-ti/net/net.c:623: undefined reference to `eth_send'
net/libnet.a(net.o): In function `NetReceive':
u-boot-ti/net/net.c:1433: undefined reference to `eth_send'
Likely because you missed adding
#define CONFIG_NET_MULTI
to the config file.
apollon, does not configure. Not your fault
but testing on it is going to be hard ;)
Here is the error :
System not configured - see README
make: *** [all] Error 1
No new additions to apollon should be made until the
base cause of the apollon failure is fixed.
So
1. Fix B2.
2. Remove apollon changes
3. Wait for runtime testing.
I am not in favor of including this patch in the 2009.11
as we will likely apply the patch after waiting a reasonable
amount of time on the runtime testing. Which is not the
same as knowing we aren't breaking the old boards.
Tom
>
> Signed-off-by: Nishanth Menon <n...@ti.com>
> Cc: Andrea Scian <andrea.sc...@dave-tech.it>
> Cc: Ben Warren <biggerbadder...@gmail.com>
> Cc: Dave Peverley <dpever...@mpc-data.co.uk>
> Cc: George G. Davis <gda...@mvista.com>
> Cc: Kyungmin Park <kyungmin.p...@samsung.com>
> Cc: Nishant Kamat <nska...@ti.com>
> Cc: Richard Woodruff <r-woodru...@ti.com>
> Cc: Rishi Bhattacharya <ri...@ti.com>
> Cc: Sandeep Paulraj <s-paul...@ti.com>
> ---
> board/apollon/apollon.c | 12 +++++++-----
> include/configs/B2.h | 2 +-
> include/configs/apollon.h | 3 ++-
> include/configs/assabet.h | 3 ++-
> include/configs/gcplus.h | 3 ++-
> include/configs/lubbock.h | 3 ++-
> include/configs/omap1510inn.h | 3 ++-
> include/configs/omap1610h2.h | 3 ++-
> include/configs/omap1610inn.h | 3 ++-
> include/configs/omap2420h4.h | 3 ++-
> include/configs/omap5912osk.h | 3 ++-
> include/configs/omap730p2.h | 3 ++-
> include/configs/pleb2.h | 6 ++++--
> 13 files changed, 32 insertions(+), 18 deletions(-)
>
> diff --git a/board/apollon/apollon.c b/board/apollon/apollon.c
> index 8964eba..b93e880 100644
> --- a/board/apollon/apollon.c
> +++ b/board/apollon/apollon.c
> @@ -24,6 +24,7 @@
> * MA 02111-1307 USA
> */
> #include <common.h>
> +#include <netdev.h>
> #include <asm/arch/omap2420.h>
> #include <asm/io.h>
> #include <asm/arch/bits.h>
> @@ -138,13 +139,14 @@ void wait_for_command_complete(unsigned int wd_base)
> }
>
> /*******************************************************************
> - * Routine:ether_init
> + * Routine:board_eth_init
> * Description: take the Ethernet controller out of reset and wait
> * for the EEPROM load to complete.
> ******************************************************************/
> -void ether_init(void)
> +int board_eth_init(bd_t *bis)
> {
> -#ifdef CONFIG_DRIVER_LAN91C96
> + int rc = 0;
> +#ifdef CONFIG_LAN91C96
> int cnt = 20;
>
> __raw_writeb(0x03, OMAP2420_CTRL_BASE + 0x0f2); /*protect->gpio74 */
> @@ -171,10 +173,10 @@ void ether_init(void)
>
> mask_config_reg(ETH_CONTROL_REG, 0x01);
> udelay(1000);
> -
> + rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE);
> eth_reset_err_out:
> - return;
> #endif
> + return rc;
> }
>
> /**********************************************
> diff --git a/include/configs/B2.h b/include/configs/B2.h
> index e5439f3..d7806e9 100644
> --- a/include/configs/B2.h
> +++ b/include/configs/B2.h
> @@ -58,7 +58,7 @@
> /*
> * Hardware drivers
> */
> -#define CONFIG_DRIVER_LAN91C96
> +#define CONFIG_LAN91C96
> #define CONFIG_LAN91C96_BASE 0x04000300 /* base address */
> #define CONFIG_SMC_USE_32_BIT
> #undef CONFIG_SHOW_ACTIVITY
> diff --git a/include/configs/apollon.h b/include/configs/apollon.h
> index 575f60e..be0dc04 100644
> --- a/include/configs/apollon.h
> +++ b/include/configs/apollon.h
> @@ -87,7 +87,8 @@
> /*
> * SMC91c96 Etherent
> */
> -#define CONFIG_DRIVER_LAN91C96
> +#define CONFIG_NET_MULTI
> +#define CONFIG_LAN91C96
> #define CONFIG_LAN91C96_BASE (APOLLON_CS1_BASE+0x300)
> #define CONFIG_LAN91C96_EXT_PHY
>
> diff --git a/include/configs/assabet.h b/include/configs/assabet.h
> index 8c5b84c..d17d4bd 100644
> --- a/include/configs/assabet.h
> +++ b/include/configs/assabet.h
> @@ -53,7 +53,8 @@
> /*
> * Hardware drivers
> */
> -#define CONFIG_DRIVER_LAN91C96 /* we have an SMC9194 on-board */
> +#define CONFIG_NET_MULTI
> +#define CONFIG_LAN91C96 /* we have an SMC9194 on-board */
> #define CONFIG_LAN91C96_BASE 0x18000000
>
> /*
> diff --git a/include/configs/gcplus.h b/include/configs/gcplus.h
> index 85db4f5..41294b9 100644
> --- a/include/configs/gcplus.h
> +++ b/include/configs/gcplus.h
> @@ -66,7 +66,8 @@
> /*
> * Hardware drivers
> */
> -#define CONFIG_DRIVER_LAN91C96 /* we have an SMC9194 on-board */
> +#define CONFIG_NET_MULTI
> +#define CONFIG_LAN91C96 /* we have an SMC9194 on-board */
> #define CONFIG_LAN91C96_BASE 0x100e0000
>
> /*
> diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h
> index 43913ca..0a69210 100644
> --- a/include/configs/lubbock.h
> +++ b/include/configs/lubbock.h
> @@ -58,7 +58,8 @@
> /*
> * Hardware drivers
> */
> -#define CONFIG_DRIVER_LAN91C96
> +#define CONFIG_NET_MULTI
> +#define CONFIG_LAN91C96
> #define CONFIG_LAN91C96_BASE 0x0C000000
>
> /*
> diff --git a/include/configs/omap1510inn.h b/include/configs/omap1510inn.h
> index 8408209..b0ebafd 100644
> --- a/include/configs/omap1510inn.h
> +++ b/include/configs/omap1510inn.h
> @@ -60,7 +60,8 @@
> #define CONFIG_SMC9196_BASE 0x08000300
> #define CONFIG_SMC9196_EXT_PHY
> */
> -#define CONFIG_DRIVER_LAN91C96
> +#define CONFIG_NET_MULTI
> +#define CONFIG_LAN91C96
> #define CONFIG_LAN91C96_BASE 0x08000300
> #define CONFIG_LAN91C96_EXT_PHY
>
> diff --git a/include/configs/omap1610h2.h b/include/configs/omap1610h2.h
> index 42e0198..0bbb5b3 100644
> --- a/include/configs/omap1610h2.h
> +++ b/include/configs/omap1610h2.h
> @@ -57,7 +57,8 @@
> /*
> * Hardware drivers
> */
> -#define CONFIG_DRIVER_LAN91C96
> +#define CONFIG_NET_MULTI
> +#define CONFIG_LAN91C96
> #define CONFIG_LAN91C96_BASE 0x04000300
> #define CONFIG_LAN91C96_EXT_PHY
>
> diff --git a/include/configs/omap1610inn.h b/include/configs/omap1610inn.h
> index 22c873e..832dd42 100644
> --- a/include/configs/omap1610inn.h
> +++ b/include/configs/omap1610inn.h
> @@ -58,7 +58,8 @@
> */
> /*
> */
> -#define CONFIG_DRIVER_LAN91C96
> +#define CONFIG_NET_MULTI
> +#define CONFIG_LAN91C96
> #define CONFIG_LAN91C96_BASE 0x04000300
> #define CONFIG_LAN91C96_EXT_PHY
>
> diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h
> index 9c18842..6ab4438 100644
> --- a/include/configs/omap2420h4.h
> +++ b/include/configs/omap2420h4.h
> @@ -81,7 +81,8 @@
> /*
> * SMC91c96 Etherent
> */
> -#define CONFIG_DRIVER_LAN91C96
> +#define CONFIG_NET_MULTI
> +#define CONFIG_LAN91C96
> #define CONFIG_LAN91C96_BASE (H4_CS1_BASE+0x300)
> #define CONFIG_LAN91C96_EXT_PHY
>
> diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h
> index d0ce9dc..bc660e3 100644
> --- a/include/configs/omap5912osk.h
> +++ b/include/configs/omap5912osk.h
> @@ -61,7 +61,8 @@
> */
> /*
> */
> -#define CONFIG_DRIVER_LAN91C96
> +#define CONFIG_NET_MULTI
> +#define CONFIG_LAN91C96
> #define CONFIG_LAN91C96_BASE 0x04800300
> #define CONFIG_LAN91C96_EXT_PHY
>
> diff --git a/include/configs/omap730p2.h b/include/configs/omap730p2.h
> index 32a9b23..a6a8a02 100644
> --- a/include/configs/omap730p2.h
> +++ b/include/configs/omap730p2.h
> @@ -65,7 +65,8 @@
> * Hardware drivers
> */
>
> -#define CONFIG_DRIVER_LAN91C96
> +#define CONFIG_NET_MULTI
> +#define CONFIG_LAN91C96
> #define CONFIG_LAN91C96_BASE 0x04000300
> #define CONFIG_LAN91C96_EXT_PHY
>
> diff --git a/include/configs/pleb2.h b/include/configs/pleb2.h
> index 635ef71..9e69411 100644
> --- a/include/configs/pleb2.h
> +++ b/include/configs/pleb2.h
> @@ -56,8 +56,10 @@
> */
>
> /* None - PLEB 2 doesn't have any of this.
> - #define CONFIG_DRIVER_LAN91C96
> - #define CONFIG_LAN91C96_BASE 0x0C000000 */
> + #define CONFIG_NET_MULTI
> + #define CONFIG_LAN91C96
> + #define CONFIG_LAN91C96_BASE 0x0C000000
> + */
>
> /*
> * select serial console configuration
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
