Enable the NET MULTI option and remove build warning
Tested: SDP3430
Signed-off-by: Nishanth Menon <n...@ti.com>
Cc: Ben Warren <biggerbadder...@gmail.com>
Cc: Sandeep Paulraj <s-paul...@ti.com>
---
board/ti/sdp3430/sdp.c | 12 +++++++-----
include/configs/omap3_sdp3430.h | 3 ++-
2 files changed, 9 insertions(+), 6 deletions(-)
diff --git a/board/ti/sdp3430/sdp.c b/board/ti/sdp3430/sdp.c
index 40cf26f..0d8e20d 100644
--- a/board/ti/sdp3430/sdp.c
+++ b/board/ti/sdp3430/sdp.c
@@ -22,6 +22,7 @@
* MA 02111-1307 USA
*/
#include <common.h>
+#include <netdev.h>
#include <twl4030.h>
#include <asm/io.h>
#include <asm/arch/mux.h>
@@ -125,12 +126,13 @@ int board_init(void)
#define ETH_CONTROL_REG (CONFIG_LAN91C96_BASE + 0x30b)
/**
- * @brief ether_init Take the Ethernet controller out of reset and wait
+ * @brief board_eth_init Take the Ethernet controller out of reset and wait
* for the EEPROM load to complete.
*/
-static void ether_init(void)
+int board_eth_init(bd_t *bis)
{
-#ifdef CONFIG_DRIVER_LAN91C96
+ int rc = 0;
+#ifdef CONFIG_LAN91C96
int cnt = 20;
writew(0x0, LAN_RESET_REGISTER);
@@ -155,10 +157,11 @@ static void ether_init(void)
writeb(readb(ETH_CONTROL_REG) & ~0x1, ETH_CONTROL_REG);
udelay(1000);
+ rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE);
reset_err_out:
- return;
#endif
+ return rc;
}
/**
@@ -187,7 +190,6 @@ int misc_init_r(void)
* VSIM - off (init, variable) for MMC1.DAT[3..7], SIM
* VPLL2 - 1.8V
*/
- ether_init();
return 0;
}
diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h
index 229dc5e..7401671 100644
--- a/include/configs/omap3_sdp3430.h
+++ b/include/configs/omap3_sdp3430.h
@@ -200,7 +200,8 @@
*/
#if defined(CONFIG_CMD_NET)
-#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_NET_MULTI
+#define CONFIG_LAN91C96
#define CONFIG_LAN91C96_BASE DEBUG_BASE
#define CONFIG_LAN91C96_EXT_PHY
--
1.6.3.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
