This series has fixes, patches to clean the code up, and add support for
specifying the sampling edge.
Main changes in v3:
1. Added "spi: cadence_qspi: Use spi mode at the point it is needed" to
address comments for SPI pol/phase code.
2. "spi: cadence_qspi: Support specifying the sample edge used" has been
split into 3 separate patches.
Phil Edworthy (11):
spi: cadence_qspi: Fix clearing of pol/pha bits
spi: cadence_qspi: Fix baud rate calculation
spi: cadence_qspi: Better debug information on the SPI clock rate
spi: cadence_qspi: Use #define for bits instead of bit shifts
spi: cadence_qspi: Clean up the #define names
spi: cadence_qspi: Use spi mode at the point it is needed
spi: cadence_qspi: Remove returns from end of void functions
spi: cadence_qspi: Fix CS timings
spi: cadence_qspi: Move DT prop code to match layout
spi: cadence_qspi: Change readdata_capture() arg to bool
spi: cadence_qspi: Support specifying the sample edge used
doc/device-tree-bindings/spi/spi-cadence.txt | 2 +
drivers/spi/cadence_qspi.c | 17 ++-
drivers/spi/cadence_qspi.h | 6 +-
drivers/spi/cadence_qspi_apb.c | 193 +++++++++++++--------------
4 files changed, 106 insertions(+), 112 deletions(-)
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
