Hi there I disabled CONFIG_DM_PCI in menuconfig because I have problem detecting AHCI SCSI controller on X86 board with CONFIG_DM_PCI enabled and the older code in drivers/pci/pci.c works for me in the previous U-boot version. Then I got the build error : u-boot/arch/x86/cpu/irq.c:29: undefined reference to `dm_pci_read_config8' u-boot/arch/x86/cpu/irq.c:104: undefined reference to `dm_pci_get_bdf' u-boot/arch/x86/cpu/irq.c:147: undefined reference to `dm_pci_read_config32' u-boot/arch/x86/cpu/pci.c:69: undefined reference to `pci_read_config16' u-boot/arch/x86/cpu/pci.c:73: undefined reference to `pci_read_config8' u-boot/arch/x86/cpu/pci.c:86: undefined reference to `pci_write_config8' u-boot/arch/x86/lib/bios_interrupts.c:137: undefined reference to `dm_pci_find_device' u-boot/arch/x86/lib/bios_interrupts.c:141: undefined reference to `dm_pci_get_bdf'
It seems that the code refers to the DM_PCI code regardless if CONFIG_DM_PCI is enabled or not. Is it ok to build U-boot with CONFIG_DM_PCI disabled or did I miss anything? Thanks a lot, Chi -------------------------------------------------------------- Intel Research and Development Ireland Limited Registered in Ireland Registered Office: Collinstown Industrial Park, Leixlip, County Kildare Registered Number: 308263 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot