Wolfgang Denk a écrit : > Dear Scott Wood, > > In message <20090911222349.ga26...@b07421-ec1.am.freescale.net> you wrote: > >> On Mon, Sep 07, 2009 at 12:15:22AM +0100, >> kevin.morf...@fearnside-systems.co.uk wrote: >> >>> This patch re-formats the arm920t s3c24x0 nand driver in preparation for >>> changes >>> to add support for the Embest SBC2440-II Board. >>> >>> The changes are as follows: >>> - re-indent the code using Lindent >>> - make sure register layouts are defined using a C struct >>> - replace the upper-case typedef'ed C struct names with lower case >>> non-typedef'ed ones >>> - make sure registers are accessed using the proper accessor functions >>> - run checkpatch.pl and fix any error reports >>> >>> It assumes the following patch has been applied first: >>> - [U-Boot][PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards, >>> 05/09/2009 >>> - patches 1/4, 2/4 and 3/4 of this series >>> >> Acked-by: Scott Wood <scottw...@freescale.com> >> > > What does that ACK mean? Who is supposed to apply this patch - the ARM > custodian? > > Best regards, > > Wolfgang Denk > >
Some of these patches are line wrapped, kevin promised to fix his email client and resend cheers, _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
