To support fastboot, we need to enable the controller first. rk3399 is using dwc3 as usb device controller, this patch enable the configs for dwc3 gadget.
Signed-off-by: Kever Yang <kever.y...@rock-chips.com> --- Changes in v4: None Changes in v3: - move the config into Kconfig file. Changes in v2: - remove config for USB2PHY UTMI BITS configs/evb-rk3399_defconfig | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/configs/evb-rk3399_defconfig b/configs/evb-rk3399_defconfig index 2951678..72f2224 100644 --- a/configs/evb-rk3399_defconfig +++ b/configs/evb-rk3399_defconfig @@ -36,3 +36,20 @@ CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_DEBUG_UART_SHIFT=2 CONFIG_USE_TINY_PRINTF=y CONFIG_ERRNO_STR=y +CONFIG_USB=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DUALSPEED=y +CONFIG_USB_GADGET_VBUS_DRAW=0 +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GADGET=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_G_DNL_MANUFACTURER="Rockchip" +CONFIG_G_DNL_VENDOR_NUM=0x2207 +CONFIG_G_DNL_PRODUCT_NUM=0x330a +CONFIG_FASTBOOT=y +CONFIG_CMD_FASTBOOT=y +CONFIG_USB_FUNCTION_FASTBOOT=y +CONFIG_FASTBOOT_FLASH=y +CONFIG_FASTBOOT_FLASH_MMC_DEV=1 +CONFIG_FASTBOOT_BUF_ADDR=0x00800800 +CONFIG_FASTBOOT_BUF_SIZE=0x08000000 -- 1.9.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
