This patch set enable rk3399 dwc3 controller and gadget driver for fastboot.
Changes in v4: - parse DT for quirk, base address and maximum speed - use 1 bit for usb2_phyif_utmi_width instead of 5bit Changes in v3: - remove utmi width DT parse from borad init - Parse the DT for utmi+ interface width in dwc3 driver - move the config into Kconfig file. Changes in v2: - parse dt for utmi width - use a variable to identify utmi+ bus width instead of CONFIG MACRO - remove config for USB2PHY UTMI BITS Kever Yang (4): rk3399: add a empty "sys_proto.h" header file board: evb-rk3399: add api to support dwc3 gadget usb: dwc3: add support for 16 bit UTMI+ interface config: rk3399: add support for dwc3 gadget arch/arm/include/asm/arch-rockchip/sys_proto.h | 10 +++++ board/rockchip/evb_rk3399/evb-rk3399.c | 51 ++++++++++++++++++++++++++ configs/evb-rk3399_defconfig | 17 +++++++++ drivers/usb/dwc3/core.c | 19 ++++++++++ drivers/usb/dwc3/core.h | 12 ++++++ 5 files changed, 109 insertions(+) create mode 100644 arch/arm/include/asm/arch-rockchip/sys_proto.h -- 1.9.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot