Hi Stefan, On 13 July 2016 at 00:04, Stefan Roese <s...@denx.de> wrote: > This patch adds support for the DFI BayTrail BT700 QSeven SoM installed > on the DFI Q7X-151 baseboard. The baseboard is equipped with the Nuvoton > NCT6102D Super IO chip providing the UART as console. > > Signed-off-by: Stefan Roese <s...@denx.de> > Cc: Simon Glass <s...@chromium.org> > Cc: Bin Meng <bmeng...@gmail.com> > --- > arch/x86/Kconfig | 4 + > arch/x86/dts/Makefile | 1 + > arch/x86/dts/dfi-bt700-q7x-151.dts | 22 +++ > arch/x86/dts/dfi-bt700.dtsi | 309 > ++++++++++++++++++++++++++++++ > board/dfi/Kconfig | 25 +++ > board/dfi/dfi-bt700/Kconfig | 28 +++ > board/dfi/dfi-bt700/MAINTAINERS | 8 + > board/dfi/dfi-bt700/Makefile | 8 + > board/dfi/dfi-bt700/acpi/mainboard.asl | 13 ++ > board/dfi/dfi-bt700/dfi-bt700.c | 30 +++ > board/dfi/dfi-bt700/dsdt.asl | 14 ++ > board/dfi/dfi-bt700/start.S | 9 + > configs/dfi-bt700-internal-uart_defconfig | 61 ++++++ > configs/dfi-bt700-q7x-151_defconfig | 63 ++++++ > include/configs/dfi-bt700.h | 74 +++++++ > 15 files changed, 669 insertions(+) > create mode 100644 arch/x86/dts/dfi-bt700-q7x-151.dts > create mode 100644 arch/x86/dts/dfi-bt700.dtsi > create mode 100644 board/dfi/Kconfig > create mode 100644 board/dfi/dfi-bt700/Kconfig > create mode 100644 board/dfi/dfi-bt700/MAINTAINERS > create mode 100644 board/dfi/dfi-bt700/Makefile > create mode 100644 board/dfi/dfi-bt700/acpi/mainboard.asl > create mode 100644 board/dfi/dfi-bt700/dfi-bt700.c > create mode 100644 board/dfi/dfi-bt700/dsdt.asl > create mode 100644 board/dfi/dfi-bt700/start.S > create mode 100644 configs/dfi-bt700-internal-uart_defconfig > create mode 100644 configs/dfi-bt700-q7x-151_defconfig > create mode 100644 include/configs/dfi-bt700.h
Reviewed-by: Simon Glass <s...@chromium.org> nit below [...] > diff --git a/board/dfi/Kconfig b/board/dfi/Kconfig > new file mode 100644 > index 0000000..1e4f90c > --- /dev/null > +++ b/board/dfi/Kconfig > @@ -0,0 +1,25 @@ > +# > +# Copyright (C) 2015, Bin Meng <bmeng...@gmail.com> > +# > +# SPDX-License-Identifier: GPL-2.0+ > +# > + > +if VENDOR_DFI > + > +choice > + prompt "Mainboard model" > + optional > + > +config TARGET_DFI_BT700 > + bool "DFI BT700 BayTrail" > + help > + Some nice text here (test-only!!!!) Yes please! > + > + Note that PCIE_ECAM_BASE is set up by the FSP so the value used > + by U-Boot matches that value. > + > +endchoice > + > +source "board/dfi/dfi-bt700/Kconfig" > + > +endif Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
