> -----Original Message----- > From: Matt Waddel [mailto:mwad...@control4.com] > Sent: Monday, September 14, 2009 5:43 PM > To: u-boot@lists.denx.de > Cc: Paulraj, Sandeep > Subject: Re: [U-Boot] [PATCH] TI: DaVinci DM365: Enabling net support on > DM365 > > Hi Sandeep, > > Is there another part to this patch still coming or did I miss a patch > along the way? This patch as-is doesn't compile: > ... > dm365evm.c: In function 'board_eth_init': > dm365evm.c:47: error: 'GIO_DIR01' undeclared (first use in this function) > dm365evm.c:47: error: (Each undeclared identifier is reported only once > dm365evm.c:47: error: for each function it appears in.) > dm365evm.c:52: error: 'GIO_OUT_DATA01' undeclared (first use in this > function)
You will need the patch with this header sent Saturday TI: DaVinci: Adding GIO addresses to header file After that you will need a patch I have not submitted because the same EMAC driver will be used by DM365, DM6467 and DA8xx series of chips. So we(developers involved with DM6467 and DA8xx and me) have to come up with a clean and clever way to achieve this. In the meanwhile if you are interested look at this tree. Its part of TI's ARAGO project and I added the EMAC support there http://arago-project.org/git/people/?p=sandeep/u-boot-davinci.git;a=summary The patch in question happens to be last commit in the above repo. I have not submitted this patch and probably will not in this form because of the reason mentioned above. If you clone the tree from the above mentioned link you will get a working version of U-Boot for DM365. I am using it as we speak. Let me know if you have any concerns/issues. Sandeep _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
