From: Hou Zhiqiang <zhiqiang....@nxp.com>
So far, the PPA use PSCI to make secondary cores bootup. So when
PPA is enabled, add the CONFIG_ARMV8_PSCI to identify the SMP
boot-method between PSCI and spin-table.
Signed-off-by: Hou Zhiqiang <zhiqiang....@nxp.com>
---
V5:
- Merged the 7th patch of this patchset in v4 to this patch.
- Enalbed secure monitor framework support.
V4:
- Reordered this patch.
- Added checking the returned value of func ppa_init_pre().
board/freescale/ls1043ardb/ls1043ardb.c | 8 ++++++++
include/configs/ls1043ardb.h | 11 +++++++++++
2 files changed, 19 insertions(+)
diff --git a/board/freescale/ls1043ardb/ls1043ardb.c
b/board/freescale/ls1043ardb/ls1043ardb.c
index ec5fdbf..65ce062 100644
--- a/board/freescale/ls1043ardb/ls1043ardb.c
+++ b/board/freescale/ls1043ardb/ls1043ardb.c
@@ -9,6 +9,7 @@
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/fsl_serdes.h>
+#include <asm/arch/ppa.h>
#include <asm/arch/soc.h>
#include <fdt_support.h>
#include <hwconfig.h>
@@ -25,6 +26,9 @@
#ifdef CONFIG_U_QE
#include <fsl_qe.h>
#endif
+#ifdef CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT
+#include <asm/armv8/sec_firmware.h>
+#endif
DECLARE_GLOBAL_DATA_PTR;
@@ -103,6 +107,10 @@ int board_init(void)
enable_layerscape_ns_access();
#endif
+#ifdef CONFIG_FSL_LS_PPA
+ sec_firmware_init();
+#endif
+
#ifdef CONFIG_U_QE
u_qe_init();
#endif
diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h
index 6d35be2..9808a59 100644
--- a/include/configs/ls1043ardb.h
+++ b/include/configs/ls1043ardb.h
@@ -9,6 +9,17 @@
#include "ls1043a_common.h"
+#if defined(CONFIG_FSL_LS_PPA)
+#define CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT
+#define CONFIG_ARMV8_PSCI
+#define CONFIG_SYS_LS_PPA_DRAM_BLOCK_MIN_SIZE (1UL * 1024 * 1024)
+
+#define CONFIG_SYS_LS_PPA_FW_IN_NOR
+#ifdef CONFIG_SYS_LS_PPA_FW_IN_NOR
+#define CONFIG_SYS_LS_PPA_FW_ADDR 0x60500000
+#endif
+#endif
+
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
--
2.1.0.27.g96db324
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
