On 05/22/2016 05:59 AM, Wills Wang wrote: > We need reset the Ethernet Switch analog part before operation, > or the build-in Ethernet PHY don't work. > > Signed-off-by: Wills Wang <wills.w...@live.com> > ---
So what changed in V2 here ? > arch/mips/mach-ath79/include/mach/ar71xx_regs.h | 1 + > arch/mips/mach-ath79/reset.c | 3 ++- > 2 files changed, 3 insertions(+), 1 deletion(-) > > diff --git a/arch/mips/mach-ath79/include/mach/ar71xx_regs.h > b/arch/mips/mach-ath79/include/mach/ar71xx_regs.h > index a8e51cb..dabcad0 100644 > --- a/arch/mips/mach-ath79/include/mach/ar71xx_regs.h > +++ b/arch/mips/mach-ath79/include/mach/ar71xx_regs.h > @@ -660,6 +660,7 @@ > > #define AR933X_RESET_GE1_MDIO BIT(23) > #define AR933X_RESET_GE0_MDIO BIT(22) > +#define AR933X_RESET_ETH_SWITCH_ANALOG BIT(14) > #define AR933X_RESET_GE1_MAC BIT(13) > #define AR933X_RESET_WMAC BIT(11) > #define AR933X_RESET_GE0_MAC BIT(9) > diff --git a/arch/mips/mach-ath79/reset.c b/arch/mips/mach-ath79/reset.c > index 188eccb..a88bcbc 100644 > --- a/arch/mips/mach-ath79/reset.c > +++ b/arch/mips/mach-ath79/reset.c > @@ -81,7 +81,8 @@ static int eth_init_ar933x(void) > MAP_NOCACHE); > const u32 mask = AR933X_RESET_GE0_MAC | AR933X_RESET_GE0_MDIO | > AR933X_RESET_GE1_MAC | AR933X_RESET_GE1_MDIO | > - AR933X_RESET_ETH_SWITCH; > + AR933X_RESET_ETH_SWITCH | > + AR933X_RESET_ETH_SWITCH_ANALOG; > > /* Clear MDIO slave EN bit. */ > clrbits_be32(rregs + AR933X_RESET_REG_BOOTSTRAP, BIT(17)); > -- Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
