On 05/21/2016 01:03 PM, Wills Wang wrote: > > > On 05/21/2016 01:08 AM, Marek Vasut wrote: >> On 05/20/2016 06:43 PM, Wills Wang wrote: >>> >>> On 05/20/2016 07:59 PM, Marek Vasut wrote: >>>> On 05/20/2016 06:18 AM, Wills Wang wrote: >>>>> On 05/08/2016 11:22 PM, Marek Vasut wrote: >>>>>> On 05/08/2016 02:58 PM, Daniel Schwierzeck wrote: >>>>>> >>>>>> Hi! >>>>>> >>>>>>> Am 05.05.2016 um 21:34 schrieb Marek Vasut: >>>>>>>> Add ethernet driver for the AR933x and AR934x Atheros MIPS >>>>>>>> machines. >>>>>>>> The driver could be easily extended to other WiSoCs. >>>>> How to make this patch work on ar933x board? >>>>> I apply this patch on the top of mips/next branch and enable this >>>>> option >>>>> in menuconfig, >>>>> but i can't see any boot information for Ethernet. >>>> The Kconfig conversion is not complete. See the >>>> tplink_wdr4300_defconfig >>>> for the necessary options, it should be at least these: >>>> >>>> CONFIG_CMD_NET=y >>>> CONFIG_CMD_NFS=y >>>> CONFIG_CMD_DHCP=y >>>> CONFIG_CMD_PING=y >>>> CONFIG_NET_RANDOM_ETHADDR=y >>>> CONFIG_DM_ETH=y >>>> CONFIG_AG7XXX=y >>>> >>> I add these options and boot up as the following, but my ar933x board >>> don't work, >>> the link indicator led on router is off when plug in the cable and >>> execute "dhcp" command. >>> >> Hrm, I have no idea, sorry, you'd have to dive in. It works on the board >> I have. The ar933x is such a junk chip that I kinda gave up on it. I >> also tested this on ar934x (my primary test platform) and it works. >> > I have fixed this issue, a patch will be sent later on.
Cool, thanks! > u-boot: > ap121 # dhcp > BOOTP broadcast 1 > DHCP client bound to address 192.168.42.172 (3 ms) > *** Warning: no boot file name; using 'AC2AA8C0.img' > Using eth@0x19000000 device > TFTP from server 192.168.42.250; our IP address is 192.168.42.172 > Filename 'AC2AA8C0.img'. > Load address: 0x81000000 > > openwrt: btw. it's Linux here, not openwrt. > [ 0.861533] libphy: ag71xx_mdio: probed > [ 1.445996] ag71xx-mdio.1: Found an AR7240/AR9330 built-in switch > [ 1.478056] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:GMII > [ 2.066210] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 > [uid=004dd041, driver=Generic PHY] > [ 2.074979] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode:MII > -- Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
