On 05/20/2016 06:43 PM, Wills Wang wrote: > > > On 05/20/2016 07:59 PM, Marek Vasut wrote: >> On 05/20/2016 06:18 AM, Wills Wang wrote: >>> >>> On 05/08/2016 11:22 PM, Marek Vasut wrote: >>>> On 05/08/2016 02:58 PM, Daniel Schwierzeck wrote: >>>> >>>> Hi! >>>> >>>>> Am 05.05.2016 um 21:34 schrieb Marek Vasut: >>>>>> Add ethernet driver for the AR933x and AR934x Atheros MIPS machines. >>>>>> The driver could be easily extended to other WiSoCs. >>> How to make this patch work on ar933x board? >>> I apply this patch on the top of mips/next branch and enable this option >>> in menuconfig, >>> but i can't see any boot information for Ethernet. >> The Kconfig conversion is not complete. See the tplink_wdr4300_defconfig >> for the necessary options, it should be at least these: >> >> CONFIG_CMD_NET=y >> CONFIG_CMD_NFS=y >> CONFIG_CMD_DHCP=y >> CONFIG_CMD_PING=y >> CONFIG_NET_RANDOM_ETHADDR=y >> CONFIG_DM_ETH=y >> CONFIG_AG7XXX=y >> > I add these options and boot up as the following, but my ar933x board > don't work, > the link indicator led on router is off when plug in the cable and > execute "dhcp" command. >
Hrm, I have no idea, sorry, you'd have to dive in. It works on the board I have. The ar933x is such a junk chip that I kinda gave up on it. I also tested this on ar934x (my primary test platform) and it works. -- Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot