On 5/17/2016 4:56 PM, Tom Rini wrote:
On Tue, May 17, 2016 at 09:49:53AM +0530, Lokesh Vutla wrote:
On 5/17/2016 6:11 AM, Tom Rini wrote:
On Mon, May 16, 2016 at 11:47:29AM +0530, Lokesh Vutla wrote:
Different AM335x based platforms have different serial consoles. As serial
console is Kconfig option a separate defconfig has to be created for each
platform. So pass the serial device dynamically.
Signed-off-by: Lokesh Vutla <lokeshvu...@ti.com>
---
Changes since v1:
- New patch.
board/ti/am335x/board.c | 11 +++++++++++
include/serial.h | 4 ++++
2 files changed, 15 insertions(+)
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index ff52314..56f4984 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -11,6 +11,7 @@
#include <common.h>
#include <errno.h>
#include <spl.h>
+#include <serial.h>
#include <asm/arch/cpu.h>
#include <asm/arch/hardware.h>
#include <asm/arch/omap.h>
@@ -59,6 +60,16 @@ static inline int __maybe_unused read_eeprom(void)
return ti_i2c_eeprom_am_get(-1, CONFIG_SYS_I2C_EEPROM_ADDR);
}
+#ifndef CONFIG_DM_SERIAL
+struct serial_device *default_serial_console(void)
+{
+ if (board_is_icev2())
+ return &eserial4_device;
+ else
+ return &eserial1_device;
+}
+#endif
+
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
static const struct ddr_data ddr2_data = {
.datardsratio0 = MT47H128M16RT25E_RD_DQS,
... so in the DM case we're already handling this correctly? Can't we
With DM+DT we are handling it correctly which is only in U-Boot.
This part of code is meant for only SPL(DM_* is not yet enabled in
SPL).
... aren't we in the middle of doing this conversion 'tho?
hmm... I don't think this conversion for SPL has been done.
Thanks and regards,
Lokesh
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
