On Mon, May 16, 2016 at 11:47:29AM +0530, Lokesh Vutla wrote:
> Different AM335x based platforms have different serial consoles. As serial
> console is Kconfig option a separate defconfig has to be created for each
> platform. So pass the serial device dynamically.
>
> Signed-off-by: Lokesh Vutla <lokeshvu...@ti.com>
> ---
> Changes since v1:
> - New patch.
> board/ti/am335x/board.c | 11 +++++++++++
> include/serial.h | 4 ++++
> 2 files changed, 15 insertions(+)
>
> diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
> index ff52314..56f4984 100644
> --- a/board/ti/am335x/board.c
> +++ b/board/ti/am335x/board.c
> @@ -11,6 +11,7 @@
> #include <common.h>
> #include <errno.h>
> #include <spl.h>
> +#include <serial.h>
> #include <asm/arch/cpu.h>
> #include <asm/arch/hardware.h>
> #include <asm/arch/omap.h>
> @@ -59,6 +60,16 @@ static inline int __maybe_unused read_eeprom(void)
> return ti_i2c_eeprom_am_get(-1, CONFIG_SYS_I2C_EEPROM_ADDR);
> }
>
> +#ifndef CONFIG_DM_SERIAL
> +struct serial_device *default_serial_console(void)
> +{
> + if (board_is_icev2())
> + return &eserial4_device;
> + else
> + return &eserial1_device;
> +}
> +#endif
> +
> #ifndef CONFIG_SKIP_LOWLEVEL_INIT
> static const struct ddr_data ddr2_data = {
> .datardsratio0 = MT47H128M16RT25E_RD_DQS,... so in the DM case we're already handling this correctly? Can't we just say that ICEv2 is only supported with DM enabled so that we don't need to add compat code that we'll remove rather soon (I hope..) ? Thanks! -- Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
