On Tuesday 12 April 2016 05:07 AM, Daniel Allred wrote: > Updates the SPL build so that when CONFIG_TI_SECURE_DEVICE > is in use (which it should be when building for secure parts), > the TI secure development package is used to create a valid > secure boot image. The u-boot SPL build processes is NOT aware > of the details of creating the boot image - all of that information > is encapsulated in the TI secure development package, which is > available from TI. More info can be found in README.ti-secure > > Right now, two image types are generated, MLO and X-LOADER. The types > are important, as certain boot modes implemented by the device's ROM > boot loader require one or the other (they are not equivalent). The > output filenames are u-boot-spl_HS_MLO and u-boot-spl_HS_X-LOADER. The > u-boot-spl_HS_MLO image is also copied to a file named MLO, which is > the name that the device ROM bootloader requires for loading from the > FAT partition of an SD card (same as on non-secure devices).
Reviewed-by: Lokesh Vutla <lokeshvu...@ti.com> Thanks and regards, Lokesh _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
