On Tuesday 12 April 2016 05:07 AM, Daniel Allred wrote: > From: Madan Srinivas <mad...@ti.com> > > Adds new defconfig files for AM43xx secure devices. > These are the same as the non-secure parts, except for > CONFIG_TI_SECURE_DEVICE option set to 'y' > CONFIG_ISW_ENTRY_ADDR updated for secure images. > > Signed-off-by: Daniel Allred <d-all...@ti.com> > Signed-off-by: Madan Srinivas <mad...@ti.com> > --- > configs/am43xx_hs_evm_defconfig | 12 ++++++++++++ > configs/am43xx_hs_evm_ethboot_defconfig | 11 +++++++++++ > configs/am43xx_hs_evm_qspiboot_defconfig | 10 ++++++++++ > configs/am43xx_hs_evm_rtconly_defconfig | 12 ++++++++++++
You do not need this defconfig. Also now only DT enabled configs are accepted. Ill let Tom to comment here. Thanks and regards, Lokesh > configs/am43xx_hs_evm_usbhost_boot_defconfig | 11 +++++++++++ > configs/am43xx_hs_evm_usbspl_defconfig | 12 ++++++++++++ > 6 files changed, 68 insertions(+) > create mode 100644 configs/am43xx_hs_evm_defconfig > create mode 100644 configs/am43xx_hs_evm_ethboot_defconfig > create mode 100644 configs/am43xx_hs_evm_qspiboot_defconfig > create mode 100644 configs/am43xx_hs_evm_rtconly_defconfig > create mode 100644 configs/am43xx_hs_evm_usbhost_boot_defconfig > create mode 100644 configs/am43xx_hs_evm_usbspl_defconfig > > diff --git a/configs/am43xx_hs_evm_defconfig b/configs/am43xx_hs_evm_defconfig > new file mode 100644 > index 0000000..a79a82b > --- /dev/null > +++ b/configs/am43xx_hs_evm_defconfig > @@ -0,0 +1,12 @@ > +CONFIG_ARM=y > +CONFIG_AM43XX=y > +CONFIG_TI_SECURE_DEVICE=y > +CONFIG_TARGET_AM43XX_EVM=y > +CONFIG_SPL=y > +CONFIG_ISW_ENTRY_ADDR=0x40302ae0 > +CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND" > +# CONFIG_CMD_IMLS is not set > +# CONFIG_CMD_FLASH is not set > +# CONFIG_CMD_SETEXPR is not set > +CONFIG_SPI_FLASH_BAR=y > +CONFIG_SPI_FLASH=y > diff --git a/configs/am43xx_hs_evm_ethboot_defconfig > b/configs/am43xx_hs_evm_ethboot_defconfig > new file mode 100644 > index 0000000..06729fd > --- /dev/null > +++ b/configs/am43xx_hs_evm_ethboot_defconfig > @@ -0,0 +1,11 @@ > +CONFIG_ARM=y > +CONFIG_AM43XX=y > +CONFIG_TI_SECURE_DEVICE=y > +CONFIG_TARGET_AM43XX_EVM=y > +CONFIG_SPL=y > +CONFIG_ISW_ENTRY_ADDR=0x40302ae0 > +CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND,SPL_ETH_SUPPORT" > +# CONFIG_CMD_IMLS is not set > +# CONFIG_CMD_FLASH is not set > +# CONFIG_CMD_SETEXPR is not set > +CONFIG_SPI_FLASH=y > diff --git a/configs/am43xx_hs_evm_qspiboot_defconfig > b/configs/am43xx_hs_evm_qspiboot_defconfig > new file mode 100644 > index 0000000..8ae4672 > --- /dev/null > +++ b/configs/am43xx_hs_evm_qspiboot_defconfig > @@ -0,0 +1,10 @@ > +CONFIG_ARM=y > +CONFIG_AM43XX=y > +CONFIG_TI_SECURE_DEVICE=y > +CONFIG_TARGET_AM43XX_EVM=y > +CONFIG_ISW_ENTRY_ADDR=0x30002ae0 > +CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,QSPI,QSPI_BOOT" > +# CONFIG_CMD_IMLS is not set > +# CONFIG_CMD_FLASH is not set > +# CONFIG_CMD_SETEXPR is not set > +CONFIG_SPI_FLASH=y > diff --git a/configs/am43xx_hs_evm_rtconly_defconfig > b/configs/am43xx_hs_evm_rtconly_defconfig > new file mode 100644 > index 0000000..25c2db2 > --- /dev/null > +++ b/configs/am43xx_hs_evm_rtconly_defconfig > @@ -0,0 +1,12 @@ > +CONFIG_ARM=y > +CONFIG_AM43XX=y > +CONFIG_TI_SECURE_DEVICE=y > +CONFIG_TARGET_AM43XX_EVM=y > +CONFIG_SPL=y > +CONFIG_ISW_ENTRY_ADDR=0x40302ae0 > +CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND,SPL_RTC_ONLY_SUPPORT" > +# CONFIG_CMD_IMLS is not set > +# CONFIG_CMD_FLASH is not set > +# CONFIG_CMD_SETEXPR is not set > +CONFIG_SPI_FLASH_BAR=y > +CONFIG_SPI_FLASH=y > diff --git a/configs/am43xx_hs_evm_usbhost_boot_defconfig > b/configs/am43xx_hs_evm_usbhost_boot_defconfig > new file mode 100644 > index 0000000..776f669 > --- /dev/null > +++ b/configs/am43xx_hs_evm_usbhost_boot_defconfig > @@ -0,0 +1,11 @@ > +CONFIG_ARM=y > +CONFIG_AM43XX=y > +CONFIG_TI_SECURE_DEVICE=y > +CONFIG_TARGET_AM43XX_EVM=y > +CONFIG_SPL=y > +CONFIG_ISW_ENTRY_ADDR=0x40302ae0 > +CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND,SPL_USB_HOST_SUPPORT" > +# CONFIG_CMD_IMLS is not set > +# CONFIG_CMD_FLASH is not set > +# CONFIG_CMD_SETEXPR is not set > +CONFIG_SPI_FLASH=y > diff --git a/configs/am43xx_hs_evm_usbspl_defconfig > b/configs/am43xx_hs_evm_usbspl_defconfig > new file mode 100644 > index 0000000..5a3f566 > --- /dev/null > +++ b/configs/am43xx_hs_evm_usbspl_defconfig > @@ -0,0 +1,12 @@ > +CONFIG_ARM=y > +CONFIG_AM43XX=y > +CONFIG_TI_SECURE_DEVICE=y > +CONFIG_TARGET_AM43XX_EVM=y > +CONFIG_SPL=y > +CONFIG_ISW_ENTRY_ADDR=0x40302ae0 > +CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND,SPL_USBETH_SUPPORT" > +# CONFIG_CMD_IMLS is not set > +# CONFIG_CMD_FLASH is not set > +# CONFIG_CMD_SETEXPR is not set > +CONFIG_SPI_FLASH_BAR=y > +CONFIG_SPI_FLASH=y > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
