On 01/04/2016 23:54, Tom Rini wrote: > Having had a similar board and memory part under logic analyzer, a > tINIT3 violation was measured. The fix was involved keeping tXPR and > SDE_to_RST at the power-on defaults and setting RST_to_CKE the JEDEC > value for LPDDR2. There was also a tIH-CA violation and this was > resolved by writing the default value in rather than what the script > here uses. > > Cc: Fabio Estevam <fabio.este...@nxp.com> > Cc: Peng Fan <peng....@nxp.com> > Signed-off-by: Tom Rini <tr...@konsulko.com> > --- > board/freescale/mx6slevk/imximage.cfg | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/board/freescale/mx6slevk/imximage.cfg > b/board/freescale/mx6slevk/imximage.cfg > index 16ea597..c77bbde 100644 > --- a/board/freescale/mx6slevk/imximage.cfg > +++ b/board/freescale/mx6slevk/imximage.cfg > @@ -70,7 +70,7 @@ DATA 4 0x020e05d0 0x00080000 > DATA 4 0x021b001c 0x00008000 > DATA 4 0x021b085c 0x1b4700c7 > DATA 4 0x021b0800 0xa1390003 > -DATA 4 0x021b0890 0x00300000 > +DATA 4 0x021b0890 0x00400000 > DATA 4 0x021b08b8 0x00000800 > DATA 4 0x021b081c 0x33333333 > DATA 4 0x021b0820 0x33333333 > @@ -92,7 +92,7 @@ DATA 4 0x021b0010 0x00100A82 > DATA 4 0x021b0014 0x00000093 > DATA 4 0x021b0018 0x00001688 > DATA 4 0x021b002c 0x0f9f26d2 > -DATA 4 0x021b0030 0x0000020e > +DATA 4 0x021b0030 0x009f0e10 > DATA 4 0x021b0038 0x00190778 > DATA 4 0x021b0008 0x00000000 > DATA 4 0x021b0040 0x0000004f >
Applied to u-boot-imx, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
