2016-02-18 19:52 GMT+09:00 Masahiro Yamada <yamada.masah...@socionext.com>: > > > Changes in v4: > - Add some comments about HOST_MODE register > - Rename uniphier_sd_wait_irq() to uniphier_sd_wait_for_irq() > > Changes in v3: > - Use dev_err/dev_dbg instead of pr_err/pr_debug > - Tidy up uniphier_sd_set_ios() > - Allow to use DMA even in SPL if the target address is DMA'able > > Changes in v2: > - Fix the divisor bug on the older IP (on PH1-LD4, PH1-sLD8, PH1-Pro4) > - Increase time out because "mmc erase" can sometimes take long > - Move HOST_MODE register setting to uniphier_sd_init() > because this register does not need setting multipule times. > > Masahiro Yamada (3): > mmc: uniphier: add driver for UniPhier SD/MMC host controller > ARM: uniphier: enable UniPhier SD/MMC host driver > ARM: dts: uniphier: add SD/MMC host controller nodes >
Series, applied to u-boot-uniphier. -- Best Regards Masahiro Yamada _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot